X_prom_F_prince_X

Below is the list.

__________________
There is no 'Ctrl' button on Chuck Norris's computer keyboard, Chuck Norris is always in control.}

ira-k

It looks pretty good except your fan and rad combo..The GTS would make a pretty good CPU only loop rad, its flow restrictive so I wouldn't use it on a multi-block loop..They need higher cfm fans, they have a high fin per inch count and I don't see anything under a 86cfm Pana working to well on them..86cfm Pana..

GTS review, it actually beats the BIX by a couple of C in this review using 86cfm Pana fans.....GTS Review

They have these at Petra's that would work pretty well on a GTS.88cfm Ultra Kaze..

A shroud will help on a GTS also.

..How To: Make any Sized shroud in 2 minutes

..How To: Build A Performance Shroud

If you are wanting to run lower cfm fans you might be better off with a Swiftech 320 or a Black Ice Pro 360..

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

dr4gon

The other thing I noticed is you could benefit from 7/16" ID (5/8"OD) MasterKleer tubing. Tygon is very unnecessary.

The atx adapter isn't a must either. A paperclip works just as good.

__________________
Project: Orange Box
Join the New OCN Flickr Group - My Flickr
>>> For Sale: <<<
Team Fortress 2 - Add OCN @ 8.9.16.94:27015 to your favorites.

Xx_xBLADEx_xX

Ah yes, very good points. All though I wouldn't use a paper clip. If you have a molex adapter or an old power supply... Just something that you can yank a wire out of thats insulated. Just take about a 1/4 of the insulation off each end and presto.

Heres a good example and mod if you will.
http://www.techwarelabs.com/guides/misc_mod/psumod/

Plus I have that same res. very nice, not to small, and it does very well with bleeding the loop. Good so far

__________________

theartist

"POOFF"! You've been verified!

Seriously, your list looks like my list except for the rad & fans.

__________________

Signature your on it put, backwards this read to enough dumb were you if.

95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig.

Other Rig

X_prom_F_prince_X

Cool thanks for the help. Oh, and I forgot that all i'm planning on cooling is my cpu and a 280 when the water blocks are manufactured.

__________________
There is no 'Ctrl' button on Chuck Norris's computer keyboard, Chuck Norris is always in control.}

bmaverick

An acrylic reservoir. Like all acrylic reservoirs, it's only a question of WHEN they will leak, not if they will ever leak.

So, get a small bottle of WELD-ON 40 High Strength Acrylic Cement to get rid of any chances for a leak.

__________________
Support Your Local Sheriff - At high noon

If I ever had a transaction with you, please fill out my heatware!

X_prom_F_prince_X

How about this i made most of the recommended changes. It looks like it will work.

__________________
There is no 'Ctrl' button on Chuck Norris's computer keyboard, Chuck Norris is always in control.}

whe3ls

id go with the mcr 320 instead

__________________

ira-k

Looks fine now for a CPU loop...I'd use some shrouds to, its the cheapest few extra C you can get in WC'ing...

Clean all your new gear before you use it, and leak test, leak test some more, and then when your just really sick of leak testing do it again...

I'll leave you my cleaning and set-up PDF, be sure to read all the stickies here also, there is a lot of good info in it...

Attached Files

WC Cleaning and Set-Up.pdf (929.6 KB, 6 views)

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**