thehighlander123

ok so im tired of air cooled graphics, my hr-03 is just way to heavy and bulky

i wanna put in an mcw-60 gpu block on my x1950xt and eventualy on a 4870


my question is should i get another 120mm rad to put in between my cpu and my gpu or should u just not worry about it?

if so should i got for a black ice xtreme gtx 120 or something smaller (and cheaper)

i want to put the rad in the inside infront of my 120mm exhaust fan

__________________
There can be only one!

Member of the OCN Diablo III Club

water loop is as follows:

custom pvc res=>DDC1(9watt)w/xspc acrylic top=>
Black Ice Extreme GTX 360=>Apogee GT (bowed)=>
Dtek GFX 2=> res

zaeric19

What CFM are your rad fans now doing? If you have pretty good fans on it then it should be enough for your CPU and GPU. If you want adding another rad between the two block on the loop will help.

__________________

thehighlander123

i think they are like 80 cfms

edit: actually they are 74 cdm 2200 rpm

__________________
There can be only one!

Member of the OCN Diablo III Club

water loop is as follows:

custom pvc res=>DDC1(9watt)w/xspc acrylic top=>
Black Ice Extreme GTX 360=>Apogee GT (bowed)=>
Dtek GFX 2=> res

zaeric19

GTX with 3 80 CFM fans should be fine cooling a CPU and GPU.

Edit: I say try it out, if temps are a too high for your liking try putting in a single 120mm rad.

__________________

thehighlander123

well i kinda dont wanna buy another rad if i dont have to

__________________
There can be only one!

Member of the OCN Diablo III Club

water loop is as follows:

custom pvc res=>DDC1(9watt)w/xspc acrylic top=>
Black Ice Extreme GTX 360=>Apogee GT (bowed)=>
Dtek GFX 2=> res

ira-k

The 360 should be fine with a GPU in the loop to..If you don't like the temp's after you add it just put some higher cfm fans on it, or add 3 more like you have now in a push...Shrouds help if you aren't using any now...

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

thehighlander123

so going for some 110cfm might do some good?

and whats happened to ur pelt?

__________________
There can be only one!

Member of the OCN Diablo III Club

water loop is as follows:

custom pvc res=>DDC1(9watt)w/xspc acrylic top=>
Black Ice Extreme GTX 360=>Apogee GT (bowed)=>
Dtek GFX 2=> res

ira-k

I like the 115cfm Pana, I have 8 in a push-pull on my rad..115cfm Pana..But you might not need that much, if noise is a problem to you.If its not I would use them, at least in a pull.These 86 cfm are fine on most WC'ing loops..86cfm Pana..

I still have it, I'm just running water on this till I make sure I have a good mobo, I'll condensation proof it here pretty soon and put my Pelt back on it.

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**