|
![]() |
Overclock.net - Overclocking.net > Cooling > Water Cooling | |
Watercooling Tests ( tc120.3 + ddc3.2 +mcr320 + res tops + d5 + ek top +)
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#31 (permalink) | ||||||||||
|
Overclocker
|
i don't have that thermometer inside the water loop..sorry...
but do start another thread..i'm sure many will appreciate it...
__________________
http://www.overclock.net/off-topic/2...rclockers.html
|
||||||||||
|
|
|
|
|
#32 (permalink) | |||||||||||||
|
WaterCooler
|
lmao yeah as i've been able 2 run every other test 4 more than an hour w/o problems, yet somehow this program just quits within the 1st few milliseconds... riiiiiiiiiiight
__________________but just 4 ****s and giggles i'll try it at 3.0GHz and same voltage...
|
|||||||||||||
|
|
|
|
#33 (permalink) | ||||||||||
|
Overclocker
|
currently testing idle temps of the e8600...throttled down to 2ghz
tjmax 100, core temps are 24,24 ...room temp is around 22-23 intel definitely made something good out of that idf... man this thing is awesome..i'm just drawing 128w from the wall...80% efficient..thats 100w dc from my 800w psu..hehehhe
__________________
http://www.overclock.net/off-topic/2...rclockers.html
|
||||||||||
|
|
|
|
|
#34 (permalink) | |||||||||||||
|
WaterCooler
|
3GHz... 1.475v on the core and still a no go with that intel burn test, yet every other test has been stable 4 at least 2 hours. and i've never had a BSOD while doing anything on this rig at 3.0GHz that wasn't fault of the vid card being OC too much.
__________________u sure the test will work with amd's?
|
|||||||||||||
|
|
|
|
#35 (permalink) | ||||||||||
|
Overclocker
|
recently wet my board..hahahha
oh well..time to get more air cans... notes: heated waterblock + unclamped tygons = disaster the tygons expand...and will keep that shape...imagine increased psi by just one notch...
__________________
http://www.overclock.net/off-topic/2...rclockers.html
|
||||||||||
|
|
|
|
|
#36 (permalink) | ||||||||||
|
Overclocker
|
i changed my tubes to tygons b-44-4x...they feel tighter.. and now i'm fully clamped...booted my tpower ..and its normal at the moment...testing will resume this weekend..
__________________
http://www.overclock.net/off-topic/2...rclockers.html
|
||||||||||
|
|
|
|
|
#37 (permalink) | ||||||||||||
|
Habitual Tinkerer
![]() |
Quote:
__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads ** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**
|
||||||||||||
|
|
|
|
#38 (permalink) | ||||||||||
|
Overclocker
|
wow prime95 is super...it warms up the cpu at a constant temperature unlike occt...
i'm testing fusion at the moment...
__________________
http://www.overclock.net/off-topic/2...rclockers.html
|
||||||||||
|
|
|
|
|
#39 (permalink) | |||||||||||
|
Habitual Tinkerer
![]() |
I always liked Prime large FFT's for taking temp's...
__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads ** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**
|
|||||||||||
|
|
|
|
#40 (permalink) | ||||||||||
|
Overclocker
|
just received the gtz...pics posted..
and done with dual pa120.3 and...now just bleeding the single pa120.3 still using dtekfusionv2 will post answer to first first question later... with a single rad...at idle..and at 4ghz...damn..there is that difference already... i can't wait to load this setup.....but bleeding is a must
__________________
http://www.overclock.net/off-topic/2...rclockers.html
Last edited by Hondacity : 08-30-08 at 04:37 PM. |
||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|