Bloodvenom

Yeah I only have one 5.25 bay left if i keep fan controllers there, I may want to do a custom fan control option on the back like Cyberdruid did in one of the previous links, and that way I can alt least get 2x 5.25 bays open.. enough for at least 2-3 HD's - I better make em big ha, think that solved my problems, Will post pics of the modified illustrator to see what you guys think before I finalize what I am doing for my rig/loops

CyberDruid

You do not need a shroud on the PA rads.

__________________
Nothing to see here...just move along.

ericeod

Yeah, I found they run fine without the shroud when mine wouldnt fit internally. I donated the shroud to ira-k.

__________________
eVGA 680i Overclocking guide .......... ASUS P5E/Maximus Thread ............... 4.0GHz CPU-Z

Bloodvenom

Well since I want the best cooling for the CPU, I'm going to get the 460 on the bottom like in the build cyber did, and it seems to have barely enough room for the PSU , but would work.


here is what I have come up with, and with this option I can completely eliminate the need for the external rad with an internal, and just installing a fillport.


worst case scenario i put on a 25mm shroud for at least some benefit. All else would work ... I think at least- Mind you this is my first WC build so my opinions maybe completely wrong. And I would definitely buy in specific purchases to make sure everything would fit before hand


How's that look?

Attached Thumbnails

 

Bloodvenom

So any thoughts on the updated setup? Or modifications I can do to the loop to help it? Or does it look pretty good as is?