DdotRoq

Hello everyone,

I am about to fill my system for the first time (to leak test) and have Feser One Cooling liquid. My question is: Am I supposed to ONLY use the Feser One Cooling Liquid or do I mix with Distilled water? or should I use Distilled water only?

Thanks, I'm trying to take as much precaution as I don't want to mess up my video card /CPU.

Thanks!


Dave

RAND0M1ZER

The feser fluid is meant to be put in your loop AS IS, no need to add anything else.

__________________

twitch101

im in the process of leak testing my first loop and had a big leak right away right before my cpu block. to save money i would leak test with distilled, then once you know your safe put in the feser. that stuff is expensive.... :

cltitus

distilled water 1.29 a gallon at local supermarket

__________________

xguntherc

yea, I'd run with distilled first, but make sure you have a way to drain when your ready for the Feser one.. oh and above you said your leak testing yet you wanna be careful not to mess up a GPU.. I'd suggest pulling out your RAM, and your GPU out of the case when you leak test.. and pull the Motherboard power cable out also. so the only things ON, are the water parts, that way no shorts will occour if there is... god forbid, a leak. You can unplug the Mobo, and jump the PSU so it will still power on, do you know how to do that?

__________________
H20 Loop: Swiftech Apogee GTZ, Feser TFC360 RAD w/ 3 Yate Loon D12SM, MCP-655 D5 Vario, Micro Res v2, Masterkleer 7/16 ID, DD "FatBoy" 1/2 Barbs, Pentosin G11 Blue. 28c Idle, 39c Load

Project HAF Water-Cooled
3DMark06 High Score 21,710 http://service.futuremark.com/compare?3dm06=9678912
Best Overclock, & There's More to Come http://valid.canardpc.com/show_oc.php?id=491589

Official OCN Camera Club
|Nikon D40| |18-105mm f/3.5-5.6 VR| |55-200mm f/4-5.6 VR|

twitch101

$0.62 here :P