|
![]() |
Overclock.net - Overclocking.net > Cooling > Water Cooling | |
Homemade Reservoir **Completed**
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||||
|
Overclocker
|
Retailers
Standard PVC Products Transparent PVC Products Copper Plumbing Products Required Materials Epoxy Drillbit 1/2" Electric Drill PVC Cement G3/4" Barbs (x2) PVC Pipe 12"L x 3"D PVC Dome Cap 3"D (x2) Copper 90° Elbow 1/4" ID (x2) Transparent 3/8" ID Tubing 8"L Materials Laid Out
![]() Mark PVC Pipe for Cutting ![]() PVC Pipe Cut ![]() Caps Test Fitted ![]() Used Level to Find Center of Cap ![]() Hole Drilled for Barb With 1/2" Drillbit ![]() Barbs Test Fitted and Epoxyed ![]() Hole Drilled for Copper Elbow with 3/8" Drillbit ![]() Copper Elbow Test Fitted and Epoxyed ![]() Completely Assembled and Painted Matte Black ![]()
__________________
![]() Quote:
Last edited by RockNRolla : 02-23-09 at 07:07 PM |
||||||||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
WaterCooler
![]() |
this is exactly how i made mine
![]() ![]() now i have one on the back of my pc, made a little better and spray painted black to match
__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218 Dual Loop: custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top
Last edited by thehighlander123 : 02-23-09 at 07:03 PM |
|||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||||
|
Overclocker
|
PVC Reservoir Club, anyone?
__________________
![]() Quote:
|
||||||||||||||
|
|
|
|
|
#4 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
Amazing.
__________________
|
||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
WaterCooler
![]() |
ahh i love ur fill guage! thats pretty genius
__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218 Dual Loop: custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top
|
|||||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||||
|
WaterCooler
![]() |
how much total cost?
__________________
Quote:
Quote:
Alabama Overclocker
|
||||||||||||||
|
|
|
|
|
#7 (permalink) | ||||||||||||||
|
Overclocker
|
Like $15-20
__________________
![]() Quote:
Last edited by RockNRolla : 02-23-09 at 09:41 PM |
||||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||||
|
Folding Fanatic
![]() |
Eh for $25 I'd pick up a Swiftech micro res. But nice job for the DIY.
__________________
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|