Zippit

My motherboard is due to arrive today, I've got a short day at school then I'll rush home and take my PC apart and paint it and PROPERLY assemble it this time around. :P


Also... what do you guys think of the name 'Blade Dancer' ?

__________________

Follow me build the BladeDancer

zomgiwin

getting an intel mobo eh?
i'm personally still living with my p5n-e
my board and its 0.8vdroop :/

Zippit

YAY my motherboard arrived! I'll take pics of the progress... I'll also be striping my case bare and get it ready to be painted.

__________________

Follow me build the BladeDancer

MeeksMan13

sweet! pics or it didn't happen

and the name blade dancer is actually pretty awesome. it's better than "The Factory" which is my descriptive but unimpressive name for my rig

__________________

Zippit

UUUgh! I'm done... my index finger hurts from pressing the button on the can.


I've had a few drips... nothing big. I really like the look of the plastidip!


I'm going to take a break and upload pics later.

__________________

Follow me build the BladeDancer

Zippit

sorry guys... the project is stalled... I went through my ankle and I've sprained my foot.


I'll be out for a few days.

__________________

Follow me build the BladeDancer

MeeksMan13

awesome! how many layers did you do?
and that really sucks about your ankle

__________________

Zippit

4~5.


I tried putting the PC back together on one foot while the paint still hardens... HOW DO YOU MEAN I AM ADDICTED?

__________________

Follow me build the BladeDancer

Icekilla

Hey there zip! how are you? ouch... hore you get better

I like the way this build looks but... what did you do to the sweet P5N-E? it's gonna fell loney now

Anywya, have you though about adding Cathode lights inside the case? That would make it just perfect.

__________________
Steam: murderworship666||my speedtest result||FOLD PEOPLE!! KEEP'EM FOLDING!!||keep your network safe

NoGuru

Zippit I will list my settings for you to look at. Keep in mind that this set up is for a 1:1 ratio with memory. Also don't forget to go in Advance Bios Features and Disable,

Limit CPUID Max 3
No Execute memory Protect
CPU Enhance Halt (CIE)
C2/C2E State Support
C4/C4E State Support
CPU Thermal Monitor
CPU EIST Function
Virtualization Technology

Hope you get better fast.

E8400 515 X 8 4.120.1MHz F9 BIOS

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8 ]
Fine CPU Clock Ratio............................[ 0.0 ]
CPU Frequency 4.0GHz...........................[ 515 x 8.0 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 515 ]
PCI Express Frequency (Mhz).....................[ AUTO ]
C.I.A 2 ..................................................[Disabled]

******Advanced Clock Control******

CPU Clock Drive.................................[ 700mv ]
PCI Express Clock Drive.........................[ 700mv ]
CPU Clock Skew..................................[ 50ps ]
MCH Clock Skew..................................[ 150ps ]

******DRAM Performance Control******

Performance Enhance .............................[Standard]
Extreme Memory Profile (XMP)....................[ Disabled ]
(G) MCH Frequency Latch.........................[ 333MHz ]
System Memory Multipler.........................[ 2.00B ]
Memory Frequency 1066...........................[ 1024 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15
]

******Advanced Timing Control******

tRRD............................................Au to
tWTR............................................ Auto
tWR............................................. Auto
tRFC............................................[ 52 ] Auto
tRTP............................................ Auto
Command Rate (cmd)..............................[ 2 ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...................[ 1.26875 ] (1.232 cpu-z) or notch two depending on ur vid
CPU Termination [ 1.20 ]...................[ 1.28 ]
CPU PLL [ 1.50 ]...................[ 1.57 ]
CPU Reference [ 0.760 ]...................[ 0.810 ] notch two if doesnt boot.

MCH Core [1.1 ]...................[ 1.28 ] or 1.3
MCH Reference [0.760 ]...................[ 0.746 ] notch two if doesnt boot.
MCH/DRAM Refernce [0.900 ]...................[ Auto ]
ICH I/O [1.500 ]...................[ Auto ]
ICH Core [1.100 ]...................[ Auto ]

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi