this_barb

Danger Den DD12V-D5 Pump
Maze4 CPU Block
Acetal Maze4 GPU Block
Danger Den Dual 3.5" Floppy Bay Reservoir
MCT-40 Non-Cunductive Solution

I'm still new to water cooling so tell me if I'm missing something else. What radiator should I get? And radiators are placed outside of the computer, correct?

__________________
List of updates to do by summer: (1) New PSU: Seasonic S12 600W, (2) New OCZ Phase change or WC, (3) Sleeve cables: white, (4) 1 More 12" CCFL, (5) Some dremel action: circular side window

Lando95

Ditch the Maze 4 cpu block; it's an old design. The TDX will give you better temps.

About the radiator: since you are cooling both your cpu and gpu, I would go with a double 120mm radiator as a minimum. I would suggest a double heatercore with shroud, but you can also get away with a Black Ice Extreme 2 (not the Pro model, make sure it's the Extreme).

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

this_barb

Ok, what about the Black Ice Extreme III? And where is the radiator usually mounted?

__________________
List of updates to do by summer: (1) New PSU: Seasonic S12 600W, (2) New OCZ Phase change or WC, (3) Sleeve cables: white, (4) 1 More 12" CCFL, (5) Some dremel action: circular side window

Lando95

The BIX 3 is a very good radiator. However, with the right fans, a double heatercore will perform about the same as the BIX3, and the heatercore is MUCH cheaper. Plus, the BIX 3 is very large.

The radiator can be mounted pretty much any where there is room. Most people put theirs outside the case, as it's just easier to work on that way. You could also get the Swiftech Radbox(look under liquid cooling products), which mounts to either an 80mm or 120mm fan hole in the back of your case. It will allow you to use either the BIX 2 or double heatercore. It's pretty much up to you and how much work you want to do.

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

this_barb

I think I'll go for the BIXII instead of a heatercore (I got money to burn)

__________________
List of updates to do by summer: (1) New PSU: Seasonic S12 600W, (2) New OCZ Phase change or WC, (3) Sleeve cables: white, (4) 1 More 12" CCFL, (5) Some dremel action: circular side window

Lando95

Cool, keep us updated with your results.

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!