xoraxora

So I'm thinking of getting a liter of FluidXP+ again, SVC sells the HP variety for arround $15. I have stayed away from the ridiculously expensive NANO or the Extreme.
I have been using FluidXp+ for years after a few bad choices (something with two tees amongst others).
At $15 its more than worth its money.

I do have 2nd thoughts about it now, since its electrical conductivity is not so non-conductive.

Which got me wondering what everyone else was using in their loop.
All comments are welcome.

Thelis

From what I have heard, Feser One F1 all the way.

TheCh3F

Distilled water + a few drops of PT Nuke only. If I reallllly feel like polluting my loop I'll add some Pentosin G12 (blue flavor).

__________________

CPU/NB Loop: HK 3.0 :: Bloodrage NB :: GTX360 :: H1011's :: 655v :: TYGON 3606 7/16"

Q6600 G0 4.1GHz on water
Core i7 C0 4GHz on water
955 BE 4GHz on water
Core i7 D0 4.4GHz on air

AMOCO

distilled water & blue feser uv dye

__________________

DennisC

I been using G11 for a few months and I don't like it. I mixed it with distilled water + 2 drops of PT nuke but the blue color fades after a few weeks. My water then turns brownish after a while and there's a lot of stuff growing in my loop. I just cleaned everything today again with vinegar so right now its clean.

__________________

DanielleP

Feser UV Purple

Thelis

Blue's the way to go, you and I both know it.

xoraxora

Yeah, I could have sworn some of the stuff growing in my loop had flippers when I used a Tt once.

dreadlord369

Distilled+PT nuke all the way.

__________________

**The Prolimatech Club**

DanielleP

Penstosin G11 doesnt really go all grimey unless your not using enough PT Nuke ..