motoray

Ok so ive been slowly removing my TT products for a couple weeks now im using swiftteck GPU blocks and i got new radiators in today( to replace TT). Last week my TTexternal tank leaked so i removed it. Now my resivor (attached to pump) spider cracked and leaked luckily i made drain holes just in case. so i need a new waterpump and resivor ASAP and im terrified my cpu block is next.

SO any suggestions on good quality pump and a very good AMD waterblock would be greatly appretciated so i can get this stuff overnight shipped today if possible for i am out a computer. THANKS

006

pump: MCP355

Reservoir: XSPC restop

CPU Block: Heatkiller 3.0

Hope that helps.

__________________

Project Log: T-600 Watercooled

motoray

is the Swiftech MCRES Micro Revision 2 reservoir any good?]
and is the 355 pumps better or worse than the 655

006

355 and 655 are both good pumps, but 655 is stronger than 355.

Combining 355 with XSPC restop will make it as good as 655 plus you will save

I can't say much about Swiftech MCRES Micro Revision 2 since i haven't used it personally.

__________________

Project Log: T-600 Watercooled

motoray

i just realized the res sits as part of the pump Now will the 355 be sufficient with cpu block 120mm rad to 2 gpu blocks then 240mm rad. And how tall is ur pump with the tank on top? thanks for the help

006

you will be fine.
it's 5 inches tall.

__________________

Project Log: T-600 Watercooled

motoray

which fittings would you use?

006

FAT BOY 1/2 OD http://www.petrastechshop.com/dadepofbofig.html

__________________

Project Log: T-600 Watercooled

motoray

well im running 3/8id hose i was wondering between the options on sidewinder between the swiftec, dtec, ek, and bitspower

006

like these ones http://www.sidewindercomputers.com/big1sishfifo1.html

Yeah get those.

__________________

Project Log: T-600 Watercooled