waqasr

And then you should flush with distilled, you dont want all the minerals and impurities from tap water to settle in the rad.

__________________
SEX
Now that ive caught your attention please scroll up and ACTUALLY read my post
FOR SALE Intel Q8200 , POV 8800 GTS 512, Phenom 9500!
IVE GOT SOME SAN ACES FOR US UK GUYS, GIMME A PM IF YOUR INTERESTED
17718 3DMARK 06 score with sig righttp://service.futuremark.com/compare?3dm06=6793718
My Xbox Gamertag is LiL WaKy, i challenge you to Street Fighter IV, COD4 and Forza 2!

Eastrider

Mmmh, well, then I have cloudy tubing with PT Nuke, and growth without it. ._. What to do now?


Also, I use a PA120,3, a FuzionV2 AND two EK VGA. IIRC; the EK VGA have some aluminium parts on it:

http://www.nexthardware.com/recensio...e-acetal_2.htm

Would you recommend me to take it off? Any decrease on GPUºC performance?

__________________

Protezione

the aluminium parts dont touch the water, so you are ok!

__________________

Shrimpykins

10% vinegar 90% water and run it for a few hours.

__________________

We Are Gr33n Machine

ಠ_ಠ I fold because I can.
E8400 Revision C0 @ 4.275GHz
E8600 Revision E0 @ 5.0Ghz w/ water cooling
Shrimps projects (works in progress, as well as ideas)
Wurk lawg 4 teh waturkewl

ChielScape

this. so dont worry about it. Eddy knows what he's doing.

__________________

tha d0ctor

I have an aluminum rad on my loops (thank you thermaltake!), do the additives the say they are anti-corrosive prevent again galvanization

__________________

I7 920|D0|4727 MHZ

____________________________
.:|Official|Volt|Mod|Squad|Member|:.

Rebel4055

Can of air and a tooth brush D:

__________________

Eastrider

:P

So, after reading the "Don't use dyes, or your loop will end up junked" thread, what's around this page, I decided to go color tubing... the blue UV Feser. Not sure when it will arrive... I have a Primochill dye syringe, is a good idea to put at least a bit, for the anticorrosive?

The aluminium part inside the block makes crazy restriction, so I'm removing it anyway.

As soon as the barbs and new blue tubing are here, I'll do the complete cleaning.

--

Also, boiling hot water with vinegar, or with soap? Since I'm not able to get the acid that tK Fury mentioned, what would be my best coice, boiling distilled w/ soap and vinegar? (For cleaning both inside and outside)

__________________

Eastrider

People, I'm also cleaning my blocks...

It's a good idea to submerge them on boiling water, with the acetal, barbs and all? (Obviously without the O-Rings).

Because it's exactly the same material outside than inside, and the buring hazard for me of boiling water flowing though it is too high.

Do I do it?

__________________

ira-k

I'd just throw them in a bowl of rubbing alcohol for a few minutes then use a tooth brush on them if you need to. Just don't get alcohol on plexi or you can crack it out. It's hard on rubber to I'd think.

It probably wouldn't hurt them to boil them lightly, real lightly, I'd be worried about that changing the color of the Delrin/acetal, or even possibly warping it a little. Might, might not, I've never done it so I really don't know.

__________________
...***Beware all ye Men born of Woman, beware the Hemogoblins***...
**E8600 @ 5751Mhz ***OCN Water Cooling Club And Picture Gallery ***150 Opty @ 3242Mhz **