imadude10

If you need more dimensions just PM me or something and I'll get them when I can. My computer is in pieces right now as I am waiting for new ones to come in tomorrow.

Just an afterthought: It's 15.25 inches from the inside of the expansion slots to the inside of the fan mounts on the front.

rmvvwls

I just found something interesting. I could use something like this: http://www.pccasegear.com/index.php?...ducts_id=12030
stacked in the top 120mm area, with pump/res underneath it. That would solve the height restrictions, and allow me to get the effect of a 240 rad.
Thanks again imadude10

__________________

ChielScape

those dont really work. very poor performance.


and yes, with only a 5850 the 240 will do great. alternatively you could do a 240 and a 120 somewhere else, but make sure you get a DDC3.2/MCP355 then, to handle the added restriction.

__________________

rmvvwls

Only problem with using a 240 is that all the ones I've seen come up ~20mm too long. If they were actually 240mm, I'd be fine, but they're more like 280. I'm fine with removing the hdd caddie trays, but I don't really want to go cutting a slot in the case.
If those stackable ones aren't good enough, as you say, then I suppose it's back to air cooling for me...

*thought* OR 2x 120mm rads, mounted at the front and rear of the case. Tubing would be a nightmare, but could possibly work.

__________________