|
![]() |
Overclock.net - Overclocking.net > Cooling > Water Cooling | |
Any i7 920 users on water? temps?
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
Overclocker in Training
![]() |
Would be interested to see what kind of load temps (OCCT) people are getting on their i7's.
|
|||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||||
|
Case Modder
![]() |
Thats really broad, depends on clockspeed, voltage, rad size, ambient temp, etc... For all its worth, I got in the mid-upper 60s on my current oc, ambient probably around 70f.
__________________
Quote:
|
||||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
4.0 GHz
![]() |
Post your clock, voltage, and temps, as well as watercooling setup then...
__________________
ಠ_ಠ I fold because I can. E8400 Revision C0 @ 4.275GHz E8600 Revision E0 @ 5.0Ghz w/ water cooling Shrimps projects (works in progress, as well as ideas) ![]() Wurk lawg 4 teh waturkewl
|
||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||
|
Professional GTA 4 Modder
![]() |
dont have a ss and im too lazy to go take one, but i load around 43c in 19c ambient with a 4.0ghz OC at 1.164 vcore
__________________
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE. I heard Ford is coming out with heated bumpers in 2010 so your hands don not get cold while pushing it.
|
|||||||||||||
|
|
|
|
#5 (permalink) | |||||||||||||
|
Folding Fanatic
![]() |
Clock: 4.3GHz
Hyperthreading: On Voltage BIOS: 1.45V Voltage CPU-Z: 1.42V Ambient: 21°C Idle (min): 33°C Idle (max): 38°C Load Linx (max): 76°C Load Prime (max): 70°C My Loop
__________________
REPORT and move on. Everyone, I have an urgent announcement to make: [PWN]Schubie is tricky.
![]() Usually, 4650<3850<4670<3870<4770<4830<3870X2<4850<5770<487 0<4890<4770 CF<4850X2<4850 CF<5850<5870<5770 CF<4870X2<4870 CF<4890 CF<5850 CF<5970<5870 CF
Last edited by xxbassplayerxx : 3 Weeks Ago at 12:17 AM |
|||||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
Do you by chance have HT on? And is your ram at the rated speed? I was trying to go for 4.2 GHz with 12GB at 1600 MHz and although I got it stable for a few hours, I couldn't get it stable past like 5 hours in Prime95 or linx.
__________________
If you ain't rubbin', you ain't dubbin' ![]() Low Life or No Life. #3160 LC9Z Buy my motherboards! Please?
|
|||||||||||||
|
|
|
|
|
#7 (permalink) | ||||||||||||
|
WaterCooler
|
nice..
__________________
X4 20BE @ 4Ghz X4 20BE 3DMark06 X4 20BE SuperPI ![]() i7 920 3DMark03 i7 920 3DMark05 i7 920 3DMark 06 i7 920 3DMarkVantage ![]()
|
||||||||||||
|
|
|
|
|
#8 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
Both HT On | room ambient around 18-20
4.2 @ 1.44vcore idle: 30-35ish load 65-74 (at very most rarely though) Stock 22-26 Idle Load 38-46 loop: RES>Laing D5> 120mm Feser (push/pull) > 240mm swifter > 320mm swiftech (pushpull) - dander den pump (replay) ?\> DD mc-tdx cpu block > bloodrage nothbridge > 120mm swiftech rad (pushpull) > 8800gt waterblock > Res temps were before the 8800gt block but that sohuldnt matter too much
|
|||||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||||
|
Case Modder
![]() |
ht is on, but my ram is running at 1260 with cas 7 instead of 8 at stock. i can probably get it stable with more vdimm and vtt, but outside of benching, 1260 with tighter timings is just as good.
__________________
Quote:
|
||||||||||||||
|
|
|
|
|
#10 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
And here I was thinking that you got 1600 stable with that crazy of an OC. I'm trying to get there with the classy, so I'll see if I can get it.
__________________
If you ain't rubbin', you ain't dubbin' ![]() Low Life or No Life. #3160 LC9Z Buy my motherboards! Please?
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|