Bit confused with new heatkiller! - Overclock.net

Monst3r · 2 Weeks Ago

guys when u face the heatkiller straight so the writing is up the top straight.. Is the left the inlet and right is outlet?????Also does anyone have a picture on how it should be hooked up with a reservoir and a pump.. never used a reservoir always a T-line, so im a bit confused tbh.. +Rep whoever helps, thanks

Deviance · 2 Weeks Ago

Which model do you have?

Space Pope · 2 Weeks Ago

You can dig through the archives in the Heatkiller club.

http://www.overclock.net/water-cooli...ller-club.html

From what I see, the top is the inlet, the bottom is the outlet.

Monst3r · 2 Weeks Ago

ok Thanks, How do i go about using a reservoir.. like top goes where, middle goes where etc???im only cooling CPU if that helps guys..

c5pilot · 2 Weeks Ago

I'm only familiar with the HK 3.0. If that's the one you have, the inlet is in the center and the outlet is closer to an edge. It should only be turned sideways on certain motherboards that have capacitors that keep it from seating correctly. Otherwise the fittings should be upper and lower, not left and right. Hope this helps.

Monst3r · 2 Weeks Ago

Quote:

Originally Posted by deviance

which model do you have?

3.0

Space Pope · 2 Weeks Ago

What kind of res do you have?

Monst3r · 2 Weeks Ago

Quote:

Originally Posted by c5pilot

I'm only familiar with the HK 3.0. If that's the one you have, the inlet is in the center and the outlet is closer to an edge. It should only be turned sideways on certain motherboards that have capacitors that keep it from seating correctly. Otherwise the fittings should be upper and lower, not left and right. Hope this helps.

Well i had to turn mine to the left due to capacitors.. So left is inlet?