-=sT3V3=-

Im looking for the 1/4 BSPP threaded nuts to fit on normal DTek barbs so I can build a Res.

Any one got any ideas where to find them online with international shipping?

I would prefer Stainless steel, but had no luck so far

runeazn

what are nuts??

__________________
i am 13 yeah, so i don't have the perfect grammar.
I edit my posts alot. So please reread my posts if I've edited them; It's for your benefit not mine.

mtbmike777

the things you put on the end of bolts!!!!!!

OP you'd do well to look for a local engineering company or visit you local hardware store or even a locksmith or bicycle workshop you'll most likely find one of them may have what your looking for as i used to be a cycle mechanic and we have quite a few bolts and nuts that are ss for rust prevention

__________________

-=sT3V3=-

ah, like a nut and a bolt?

Hex piece of metal with a thread down the center...

Lord Xeb

? Seriously? Come on man.

Try looking at your local hardware store. If not, google is your best friend.


Try this:

http://www.britishfasteners.com/threads/bsp.html


You can try going to your hardware store like I sad with your bolts in hand, then try different nuts.

__________________

-=sT3V3=-

In South Africa, everything is metric, specific BSPP thread is not an easy find...

runeazn

lol even in Netherlands everything is metric but I just saw worm drives with 1/2 :P

__________________
i am 13 yeah, so i don't have the perfect grammar.
I edit my posts alot. So please reread my posts if I've edited them; It's for your benefit not mine.

Manyak

There's mcmaster carr, but I don't know about their international shipping.

Either way, for building a res you're much better off tapping the holes for the barbs than you are using a nut on the other side. Less of a chance to leak.

__________________
For Sale: [Conus] CM Storm Scout, TEC, WC, Laptop, A900, Model M, GPU, Audio, and a ton more!!

oliverw92

Why are you even trying to bolt a barb on? That will be the leakiest reservoir ever...

To make a res, you need to tap the hole - make a thread in the hole - using a tap, which the barb can then screw into. You will need:

http://www.aquatuning.co.uk/product_...ize-1-1-2.html

and

http://www.aquatuning.co.uk/product_...-kit-G1-4.html

I can't remember the diameter hole you need to drill though.

If you were planning to bolt a barb onto something to make a res, it makes me think there will be other issues with your reservoir. Would you mind going through your ideas for it, so we can tell you if you are going to make a horrible mistake or something?

I also suggest PMing CyberDruid, he makes reservoirs and can give you some excellent advice, like using polycarbonate instead of acrylic etc and the type of glues to use, sizes of holes, how to stop air build up.

__________________

Lord Xeb

Damn, you live all the way over there. Well... Good luck trying to find what you need.

__________________