lohoutlaw

OK guys, found out Tap Plastics ((Plastic fab store)) wants to much money to make the base for my radiator. I Will have to order another shroud from DD.

My question:
I am currently running my P4 3.4 @ 4.081mhz with my Xp90
Running my ram @ 240mhz x 17.
Temps are as follows: 30c idle- 42c load.

I only have one shroud to mount 2 120mm fans pulling 78CFM each to cool the rad. Adding 2 more when i get the other shroud.
I want to start converting to water cooling.
Are the 2 120mm fans going to be adequate to cool my CPU and GPU?
Or should i wait for my other shroud?

Pic here

Snerp

I only have 2 fans on my rad and it's fine. I'm getting 22-25 idle and 32-35 full load with a 25% OC. As my AS 5 cures it will get better too. So I would say one shroud is fine. If you don't think so make your own. It's fun and it's cheaper.

deathdispenser

do it now of course are your fans 25mm thick or 38mm thick?

__________________
Some people think that the X2 is a little expensive for its performance...
I call 2 smp Opty 254's for less than $500 on s939 a fair deal

Now folding for Team 37726 and team ArMaDa

2nd rig:
Venus - CAB2E 0547 GPMW @ 2.8 ghz and climbing
DFI ULTRA -D / 2 x 512 mb OCZ EL Platinum
6800 GS @ 542 / 1250 and climbing
Powered by OCZ Modstream 450