Originally Posted by soloz2

you could always split up your cpu and your gpus separatly like this:

pump > rad > Y split to both cpu and gpu 1 > gpu 2 (from gpu 1) > Y combine both and go to res > pump.

this splits up your cpu from your graphics cards.

another idea would be if you have a powerful pump.

pump > rad > cpu > small rad > gpu 1 > gpu 2 > res > pump
In this setup you could run a double and a single rad or a heater core and a single rad. the second rad could be mounted inside your case to the back where there is normally the exhaust fan. You wouldn't even need a fan on that rad if you wanted quiet. (although a fan would cool better)

Originally Posted by Snerp

All those Y's, extra tubing, and more than one rad will reduce your flow. More flow will give you better temps. You are better off going with a bigger rad instead of two.

Originally Posted by soloz2

that's true. I was just trying to find ways to split up the cpu and the 2 gpus bc he was concerned w/ heat. I did just have another idea.

get one of those typhoon double bay res's that has 4 inputs and 2 outputs. then you can make 2 loops.
http://www.frozencpu.com/ex-res-10.html

Originally Posted by Snerp

Dear sweet Jesus...that looks like a leak waiting to happen
Neat idea though