Burn

There was a TON of dust...I took a towel, the one you use to dry off with, and wet it down good, put my heatercore on it, then used my air compressor to blow through it...Turns out, I needed my vacum on the other end, it gets quite dusty over there, too. I ended with with about a quarter inch of dust on the wet towel, and I dropped from 37C idle to 34 idle....I'm not gonna argue with that one. I'll take a drop like that any day!

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

soloz2

nice! right now I'm running 31 w/ a folding load this wc setup is better than I had hoped. Idk what idle temps would be, but my water temp is 24 at the moment

__________________
Current Sound: Auzen X-Fi Prelude > Soloz Audio Reference IC > TCA Gizmo > Onix Reference 1 MKII speakers

Selling:Lots of Great Stuff!

Feedback: Heatware Ebay

Burn

See, I can't measure my water temp, but my ambient is 70F, or 21C. Truth is, I can't remember the last time I cleaned it!

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

busa

My rig does the same thing. Friggin dogs... I lose about 3c everytime iI clean the rad and fans out.

__________________
Stinger Slingers V5
insanity reigns
It's better to reign in hell than serve in heaven.
There is more to life than increasing its speed. - Mahatma Gandhi...guess he's not a member of Overclock.net
Kickin avatar by "Crash"....

Burn

Yep, we have 2 labs...Both dumb, but we love them anyways. I didn't find dog hair, I found a bug in it though ?

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

soloz2

I taped a temp probe on the bottom of my res... so it's prob accurate within a degree or so

__________________
Current Sound: Auzen X-Fi Prelude > Soloz Audio Reference IC > TCA Gizmo > Onix Reference 1 MKII speakers

Selling:Lots of Great Stuff!

Feedback: Heatware Ebay

Burn

Time to load it up with FAH..I'll report back in ~10 minutes when everything's stabilized.

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

Burn

Okay...Guess where I was before...50C, now I'm at 45C!!!!!oneoneoneeleven

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

metalkobra

can i be dumb too?

Man, i wanna clean my stuff out really well, but i cant because i have my rad hooked to their home made rack thing lol, held by plastic zip ties lmao. i tried vacuuming it out but that was hard to do lol...

Burn

It's hard to vacum out unless you blew all the junk to one side with a can 'o air or a compressor. Then it's easy

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch