this n00b again

ok i was going to do a little over clocking on my e6600 so i decided to monitor the temperatures, but i ran in to a big problem.

the temp monitors don't seem to work in vista. now keep in mind i uninstalled it and reinstalled it. so i tried installing it twice. now here are the two errors that i get when trying to run the program. (it only errors when trying to run it, not installing it)

picture 1 is core temp error
picture 2 is intel TAT error

Attached Thumbnails

   

__________________
1) A good cpu cooler not too many people know about -> XIGMATEK HDT-S1283 | AKA OCZ Vendetta 2
2) The 8 PIN power connector on the MOBO is 2x 4pin power connectors combined in parallel to draw more power safely. 1x 4pin power plug will work, but you should think of an upgrade.
3) If you're running x64 OS and have more than 3GB ram installed but windows is only reporting around 3GB, Go into your bios and enable Memory remapping.

Mad_Handlez89

I have ran both in vista with no problems

Try Everest

eternaldj

They work for me also, have you tried setting the compatibility to XP?

__________________
Aumotocnic "An unfortunate member of the overclock.net insomnia club"

killerhz

right click on both and uunder sercuity use "run as admin". I have used both with Vista...

EDIT actually it's under the compatability tab at the bottom sorry...Also make sure it's the most recent core temps

__________________

aHandzProduction

I am using Everest Ultimate (latest one) in Vista 32 bit!

__________________

LAPTOP SPECS:

Desperado1987

Indeed, run it as 'Administrator'. If that doesn't help, use PC Wizard 2007.

__________________

this n00b again

i tried running both as administrator and in compability mode (windows xp)

i forgot to mention that i am running vista x64 business

when i run as admin and compability mode core temp still gives same error,

and intel tat doesn't give me the error but it doesn't run.

__________________
1) A good cpu cooler not too many people know about -> XIGMATEK HDT-S1283 | AKA OCZ Vendetta 2
2) The 8 PIN power connector on the MOBO is 2x 4pin power connectors combined in parallel to draw more power safely. 1x 4pin power plug will work, but you should think of an upgrade.
3) If you're running x64 OS and have more than 3GB ram installed but windows is only reporting around 3GB, Go into your bios and enable Memory remapping.

Desperado1987

Then my guess would be that it's because of the 64bit. There many issues with x64

__________________

this n00b again

thats not cool

__________________
1) A good cpu cooler not too many people know about -> XIGMATEK HDT-S1283 | AKA OCZ Vendetta 2
2) The 8 PIN power connector on the MOBO is 2x 4pin power connectors combined in parallel to draw more power safely. 1x 4pin power plug will work, but you should think of an upgrade.
3) If you're running x64 OS and have more than 3GB ram installed but windows is only reporting around 3GB, Go into your bios and enable Memory remapping.

killerhz

It's gotta be the 64 bit thing then. When I first installed vista I received that exact same errors and ran both as admin but I am using vista 32

__________________