ramairmustang

I have a question about the chkdsk on this computer. It's say's that chkdsk is scheduled to run on D but I have not scheduled it to run at all. After rebooting and letting chkdsk run all the way through it still come up with chkdsk is scheduled to run on D. This is preventing me to be able to defragment that partion and is also causeing a few other issues because of it. I know there is a way to manually undo it but cant remember the steps in command prompt.

__________________
E6600
3.4GHz @ 1.45vcore
Ultra ChillTec 17C Idle 37C 60min Load
MSI 650i SLI-FI Board
Antec 900
Exhaust, 2 120mm 79cfm
Intake 2 120mm 79cfm Sink, 200mm 134cfm
Chipset 80mm 34cfm on NB Heat Sink
A-Data 2GB Ram 5-5-5-15-20 stock speed.
3-4-4-8-20 OC Speed.

cognoscenti

Go to the registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager

Look for the REG_MULTI_SZ value with the following name:

BootExecute

This value contains commands that will be executed at startup.

The default value is:

autocheck autochk *

After scheduling one or more chkdsks, the entry will contain one or more autochk lines. Delete each of these lines and put the default one in place.

If you always want a check to be performedf at startup, change the value to:

autocheck autochk /f *

If you don't want any checks to be performed, delete all autocheck entries.

__________________

Q6600 @ 4017.37 MHz on Striker II

Q6600 3802.47 MHz (422.5 * 9) 790i Ultra

Q6600 4152.04 MHz (461.34 * 9) 8-8-8-18 790i Ultra

ramairmustang

Thank You. I was able to get it last night but the information will be valuable to anyone needing it in the future.

__________________
E6600
3.4GHz @ 1.45vcore
Ultra ChillTec 17C Idle 37C 60min Load
MSI 650i SLI-FI Board
Antec 900
Exhaust, 2 120mm 79cfm
Intake 2 120mm 79cfm Sink, 200mm 134cfm
Chipset 80mm 34cfm on NB Heat Sink
A-Data 2GB Ram 5-5-5-15-20 stock speed.
3-4-4-8-20 OC Speed.