Aliryl

When shutting down Vista Business x32 it stops at a bsod with the error "Dumping physical memory and *** STOP: 0x0000007F (0x00000008, 0x80154000, 0x00000000, 0x00000000) however no programs are mentioned that cause the problem, any ideas?

Vlasov_581

when did this start?

__________________
Totally into Fallout 3
3DMark06 20167 http://service.futuremark.com/result...eResultType=14

Selling my 3870X2s http://www.overclock.net/sale/418248...ah3870x2s.html

Rapha - Pandora(Indecent Noise Remix)
www.di.fm/ A State of Trance every thursday @ 11am Pacific...get the latest in trance and progressive

krazieaznboi

do you have norton antivirus? i heard that it causes this problem.

Lambent Darkness 7

My research found this for you :


This error message can occur if either of the following conditions exists:
•Your computer has hardware or software problems (hardware failure is the most common cause).
•You try to over clock the speed of your computer's processor (for example, you set a 150 MhZ processor to run at 187 MhZ). (HAHA ! that's funny because were on a overclocking forum)

The above STOP error means a trap occurred in kernel mode and the trap is either one the kernel is not allowed to have or is always fatal. The most common causes of a STOP 0x7F are:
•Low-level hardware corruption, such as corrupt memory (RAM)
•Mismatched memory modules
•A malfunctioning motherboard


Excerpt from MSKB http://support.microsoft.com/kb/137539

Hope that helps you. If you find a post helpful you know what to do

__________________

sweet_3025

Sholuldn't this error message code indicate a particular hardware failure/ malfunction?

__________________

Lambent Darkness 7

Yes, If you are able to find out what the numbers in paranthesis (4 sets) after the inital error belong to which driver and piece of hardware.

edit : STOP: 0x0000007F **(0x00000008, 0x80154000, 0x00000000, 0x00000000)***

__________________

om3n

So your ideas were one/more than one of the following:

Hardware failure
software failure
bad overclock

And that is so general I don't think it could possibly be helpful... ha ha

__________________

Hondacity

try a check disk...it could be your harddrive if you don't overclock...

__________________
http://www.overclock.net/off-topic/2...rclockers.html

Lambent Darkness 7

Oh well , cant please everyone , That why it said "if"

adramalech707

you could try and use windbg and try and debugg the bsod....now what you are seeing with the hex number...is first is

address of memory where the mishap took place then goes (argument 1; argument 2; argument 3; argument 4)

if you learn how to debugg alittle then you might be able to fix your problem so it won't happen again...

i am going through some weird bsod's very random and each time i look at the memory dump that gives all the information about the bsod...

__________________
4600+ @2.6ghz

How to solve Windows system crashes in minutes http://www.networkworld.com/news/200...sh.html?page=4

Debugging Tools for Windows http://www.microsoft.com/whdc/DevToo...g/default.mspx