AMD Ryzen Threadripper Owners Club - 1950X | 1920X | 1900X - Page 421 - Overclock.net - An Overclocking Community

Forum Jump: 

AMD Ryzen Threadripper Owners Club - 1950X | 1920X | 1900X

Reply
 
Thread Tools
post #4201 of 4222 (permalink) Old 05-02-2019, 08:03 AM
New to Overclock.net
 
MacMus's Avatar
 
Join Date: Aug 2015
Posts: 148
Rep: 0
Quote: Originally Posted by x7007 View Post
yes very good, what tests did you make ? and what is the temp full load 5 min ?
I test stability:

- cinebench for 100 tries in loop script
- realbench stress test
- pubg numa 0 gaming, xsplit slow preset twitch streaming on numa 1

I have custom loop with 2080ti and my loop is getting hot up with liquid stuck ~40-41 with max fan speeds on that last case.
CPU temps Tdie are rumping up to 75-80 degree in that last scenario, but it's were everything in the loop is working on max speeds!

If single CPU load first case with 100 looped cinebench, CPU is going up to 70 degree tdie but liquid never gets hot enough.

Last edited by MacMus; 05-02-2019 at 08:06 AM.
MacMus is offline  
Sponsored Links
Advertisement
 
post #4202 of 4222 (permalink) Old 05-06-2019, 04:34 AM
New to Overclock.net
 
Join Date: Oct 2018
Posts: 7
Rep: 0
Thermal throttling on stock

So, i have a TR 1920 with a Corsair H150i Pro AIO Watercooling and my CPU does a thermalthrottle on me for reaching more then 90° on stock settings when i do a prime95 small FFT test.


This shouldnt be the case and im wondering where the heck i messed up. Maybe someone over here can point me in the right direction.
Im using Arctic MX-2 paste.
42parsec is offline  
post #4203 of 4222 (permalink) Old 05-16-2019, 12:46 PM
New to Overclock.net
 
MacMus's Avatar
 
Join Date: Aug 2015
Posts: 148
Rep: 0
Quote: Originally Posted by 42parsec View Post
So, i have a TR 1920 with a Corsair H150i Pro AIO Watercooling and my CPU does a thermalthrottle on me for reaching more then 90° on stock settings when i do a prime95 small FFT test.


This shouldnt be the case and im wondering where the heck i messed up. Maybe someone over here can point me in the right direction.
Im using Arctic MX-2 paste.
Lool don't do that... that unrealistic load for threadripper unless your PC purpose is to run prime95!

Check what temps you are getting with your current workload and take it from there.

Look at your TR as a BMW that gives your 300km/h on a clock but do one expect you to drive with that speed for hours .. you can burn your tired and other mechanical parts.
It's ok to do it sometimes but contrast usage will results in issues.

Last edited by MacMus; 05-16-2019 at 12:49 PM.
MacMus is offline  
Sponsored Links
Advertisement
 
post #4204 of 4222 (permalink) Old 05-16-2019, 12:57 PM
New to Overclock.net
 
ssateneth's Avatar
 
Join Date: Feb 2012
Posts: 853
Rep: 43 (Unique: 38)
Quote: Originally Posted by 42parsec View Post
So, i have a TR 1920 with a Corsair H150i Pro AIO Watercooling and my CPU does a thermalthrottle on me for reaching more then 90° on stock settings when i do a prime95 small FFT test.


This shouldnt be the case and im wondering where the heck i messed up. Maybe someone over here can point me in the right direction.
Im using Arctic MX-2 paste.
tCTL 90 degrees, or tDIE 90 degrees? In any case, P95 is nowhere near as punishing on AMD compared to Intel (I'm pretty sure FMA operations run at half speed on AMD Ryzen, which is why it doesn't go crazy heat on FMA operations, but I could be wrong)

Intel Core i9-9900k (Silicon Lottery 5.1GHz @ 5.3GHz 1.36 VCore)
ASUS ROG MAXIMUS XI APEX
G.SKILL F4-4000C19D-32GTZSW (2x16GiB 4000MHz 19-19-19-39 2T, tuned to 4133MHz 14-17-17-31 2T)
EVGA NVIDIA GeForce GTX 1080 Ti FTW3
Seasonic PRIME 1300W 80+ Platinum
ssateneth is offline  
post #4205 of 4222 (permalink) Old 05-23-2019, 03:57 PM
New to Overclock.net
 
MacMus's Avatar
 
Join Date: Aug 2015
Posts: 148
Rep: 0
what kind of nonesense that is ?

This is how they fixed scheduler in new update?
Attached Thumbnails
Click image for larger version

Name:	cpu is not supported.png
Views:	22
Size:	21.2 KB
ID:	271036  

MacMus is offline  
post #4206 of 4222 (permalink) Old 05-24-2019, 04:34 AM
New to Overclock.net
 
Join Date: May 2019
Posts: 1
Rep: 0
Hey everyone,


I have a TR1920X and in an ASRock x399m Taichi, cooled by a Corsair H100i RGB Platinum. Summer is knocking on the door here, ambient temps over 25C which is affecting my cooling quite a bit, the fans spin around 1700RPM now while idle, coolant temps are just below 36C.


Since I'm sitting right next to the case, the constant fan noise unpleasant. Tried to remedy the situation by going to the Power Options and lowering the allowed minimum processor state to 60% (from 70%) which allowed the cpu multiplier to go as low as x21, but it didn't affect the temps.


The pc is used as a dev desktop, and for the occasional game, no hard loads. I'm looking for other means of keeping things just a few degrees cooler so the fans stay around 1500rpm.


The radiator is currently mounted to the top, I could maybe move it to the front so it gets the fresh air directly; right now 2 front intakes deal with that. There's also a GTX 1080FE with an Accelero Xtreme 4 cooler the front mounted radiator would blow onto if I were to move it, but I'm sure it would be fine. The AX4 does an amazing job compared to the stock FE cooler.



I also did some memory OC (just to see if I could), xmp 3200 to manual 3333, however I suspect that also contributes to the excess heat with the increased voltages and whatnot.


As you can probably tell, I'm quite inexperienced. It's a learning process. Any suggestions?
romeozor is offline  
post #4207 of 4222 (permalink) Old 05-24-2019, 05:03 PM
BOINC Cruncher
 
Keith Myers's Avatar
 
Join Date: Mar 2017
Posts: 549
Rep: 18 (Unique: 13)
Get a bigger case for better airflow. If you have graphics cards that dump hot air into the case, double the case fans up. With a bigger case, remove the AIO and put in custom loop cpu cooling. I run two separate 360mm radiator loops on my 2920X. One for the cpu and one for the RTX2080 and GTX1080Ti. Also run two more GTX 1070FE cards. I had issues controlling the cpu temp when everything was on the single loop. Currently run around 4150Mhz on Level 2 PBO with 3400 Fast memory timings. Constant cpu and gpu loads with distributed computing. The cpu keeps under the 68°C. Tdie thermal reductions.

ASUS-Linux
(15 items)
Serenity
(14 items)
Numbskull
(17 items)
CPU
I7-6850K
Motherboard
ASUS X99-E-10G-WS
GPU
EVGA 1080TI Hybrid
GPU
EVGA 1080 Hybrid
GPU
EVGA 1080 Hybrid
GPU
Zotac 1070Ti Mini
RAM
G.Skill Rampage 3000-CL15
Hard Drive
Adata SU-900
Hard Drive
Western Digital
Power Supply
EVGA Supernova 1600T2
Cooling
Corsair H110i
Case
Thermaltake Core X9
Operating System
Ubuntu 18.04 LTS Bionic Beaver
Monitor
AOC i2269vw 22-Inch
Mouse
Logitech Marble Mouse
CPU
Ryzen+ 2700X
Motherboard
ASUS ROG Crosshair VII Hero
GPU
NVIDIA GeForce GTX 1070
GPU
EVGA GTX 1080 Hybrid
GPU
EVGA RTX 2080 Hybrid
RAM
G. Skill F4-3200D-16GTZ TridentZ DDR4
Hard Drive
Crucial MX100
Hard Drive
Samsung 970 EVO M.2
Power Supply
Corsair AX1200
Cooling
EVGA CLC 280
Case
Corsair Air 540
Operating System
Ubuntu 18.04 LTS
Monitor
HP 27xw
Keyboard
Logitech M520 Keyboard/Mouse combo
CPU
AMD 2920X Threadripper
Motherboard
Asrock X399 Fatality Pro Gaming
GPU
Zotac GeForce GTX 1070FE
GPU
Zotac GeForce GTX 1070FE
GPU
EVGA GTX 1080Ti FTW Hydro
GPU
EVGA RTX 2080XC Hydro Copper
RAM
G. Skill F4-3200C14-16GTZ
RAM
G. Skill F4-3200C14-16GTZ
Hard Drive
Samsung M.2 960EVO
Hard Drive
Crucial MX200
Cooling
XSPC Raystorm Pro Neo Threadripper block
Cooling
XSPC X4 Photon 170 Pump/Reservoir times two
Cooling
XSPC RX360 Radiator times two
Cooling
Noctua NF-A12x25 fan
Case
Thermaltake Core X5 Black E-ATX
Operating System
Ubuntu 18.04 LTS
Monitor
AOC 2367F
▲ hide details ▲
Keith Myers is offline  
post #4208 of 4222 (permalink) Old 05-26-2019, 03:50 PM
WAT
 
HBizzle's Avatar
 
Join Date: May 2014
Posts: 222
Rep: 2 (Unique: 2)
Hello Threadripper owners,

Intel refugee coming over hot and heavy from a 4790K build. I am streaming on Twitch regularly now, and have been using my old 4790k box as a stream rig, but it is just not able to keep up with the games I play. Did some research and bit the bullet on a 1920x, Asrock x399m, a Kingston/HyperX 3200MHz DDR4 CL18 DIMM Memory HX432C18FBK2/8 kit thats on the Asrock QVL list (grabbed 2 to run quad channel, and cooling it with a Noctua NH-U9 TR4-SP3.

This is all going in an old Corsair Obsidian 350D case, MATX, that I have two fans running right now in, but can add an additional 2-3 if folks think I will need it. Bringing over a few SSDs, WD Blue 7200RPM, gtx 1080, and an Avermedia Live Gamer 4k over from my old build, and powered by a 750 watt PSU.

I am intending to run this at stock clocks as the benefits of OCing it for encoding purposes seem pretty limited. Wondering what I should look out for in regards to that, whether heat, throttling, or voltage issues? Gaming rig feeding into it is a 9900K+2080ti rig (dont hate me).

Last edited by HBizzle; 05-26-2019 at 04:00 PM.
HBizzle is offline  
post #4209 of 4222 (permalink) Old 05-27-2019, 02:34 PM
New to Overclock.net
 
MacMus's Avatar
 
Join Date: Aug 2015
Posts: 148
Rep: 0
Good news TR4 64 thread officially confirmed by lisa 🙂. If all cores will have memory access this will be insane 🙂 .. Do you know the details? ... anyone ?
MacMus is offline  
post #4210 of 4222 (permalink) Old 05-27-2019, 02:40 PM
New to Overclock.net
 
sblantipodi's Avatar
 
Join Date: Sep 2014
Posts: 2,048
Rep: 26 (Unique: 25)
guys when will we see Threadripper based on Zen 2?

sblantipodi is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off