Overclock.net - An Overclocking Community - View Single Post - **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
View Single Post
post #30 of (permalink) Old 08-04-2010, 04:23 PM
csanii
New to Overclock.net
 
csanii's Avatar
 
Join Date: Aug 2010
Posts: 7
Rep: 0
I have been reading a lot in the forums and there seems to be many different views on the overclock process. I have an E5200/R0 with 1066MHz memory and have managed to get it to 4GHz but suspect it was luck rather than I was doing it right.

I set the following in the BIOS:
Static Read - Disabled
Read Training - Disabled
CPU Spread- Disabled
PCI Spread- Disabled
CPU Margin- Performance

I then used ASUS TurboV to set the following:
FSB - 200->320
CPU Voltage - 1.25->1.44375
DRAM Voltage- 2.1->2.1
FSB Term Voltage- 1.2->1.2

I moved the CPU voltage up for stability under OCCT.

1) Should I be altering other parameters so I can either run a higher clock and/or a lower CPU voltage?
2) The CPU is at 62 degrees under OCCT load. What max value should be allowed?

csanii is offline