Hey, I know this is a very late reply, but your settings are a bit on the hot side as far as I can see. You set the vcore to 1.44 and with ultra high LLC it bumps up another 20 mV to 1.464 or something. For 4.6 ghz daily that would be ok on watercooling or high end air cooling IMO. I would try setting it back to 4.5 Ghz for daily usage. Also, you're hovering very close to 70 degrees, which is where Vishera usually shuts down (or throttles). You don't wanna be there. You don't really wanna be above 65 no matter what you do. On amd's website they recommend 63 as the max, and they probably have their reasons for that. Have a bit of mercy on the CPU and dial it back a bit and try 4500. Also, you can set everything from the advanced CPU settings to 130% if possible for daily usage. That's how I've been using this mobo for close to an year and it's been working wonders. Try High LLC , on this board it should give you +12 mV under load. I'm blabbering too much, sorry. Bottom line, for daily usage, try 4.5 and see what the minimum voltage you can keep up is. Screw IBT, shoot 5-10 rounds of Cinebench R15 back to back and then stress test it in Amd Overdrive and Aida64 for 1-2 hours, if it passes that it will probably pass anything you can throw at it gamewise or rendering wise (if you use Premiere Pro or Sony Vegas). Hope it helps, sorry for the wall of text and late reply!
Last edited by Archol; 07-18-2018 at 12:27 AM.