ROG Crosshair VI overclocking thread - Page 1053 - Overclock.net - An Overclocking Community

Forum Jump: 

ROG Crosshair VI overclocking thread

Reply
 
Thread Tools
post #10521 of 40632 (permalink) Old 04-21-2017, 05:12 AM
New to Overclock.net
 
y0bailey's Avatar
 
Join Date: Aug 2006
Posts: 167
Rep: 20 (Unique: 12)
BIOS 0003 has got me in a BIOS boot loop. I've got a PM in to ELMOR so I'm hoping he can get me squared away. I didn't check REFCLOCK 90, so this is on me. Anyone have any suggestions while I'm waiting to hear from ELMOR?

Basically, cleared CMOS, flashed 0003, and now I'm ending up in a "boot loop" (see videos below) in which it posts, I get a few flashing white cursors on a black screen, and then it ends up just jumping straight back into BIOS. This is while attempting to boot my OS, cannot get OS to load at all.

After a few failed attempts, CMOS clears, I then moved the LN2 jumper to "enabled." Same result. I have confirmed my boot M.2 drive is selected, etc.

Here are the 2 videos of the "BIOS BOOT LOOP." First video demonstrates the cursors, second is the on-mobo LCD display showing what cycles.


https://youtu.be/xvk6uDiVeAw (I cut this video a bit too short, at the end it basically goes to the BIOS screen again).
https://youtu.be/mhWBgsYGIZk
y0bailey is offline  
Sponsored Links
Advertisement
 
post #10522 of 40632 (permalink) Old 04-21-2017, 05:14 AM
New to Overclock.net
 
lordzed83's Avatar
 
Join Date: Mar 2013
Location: Nottingham
Posts: 1,257
Rep: 31 (Unique: 25)
I have not been checking topic for 2 days but this new Memtest by W1zzard came out.
Its BETTER than Dos Memtest86 and windows HCI Memtest !!!!
Reason is... more stress on IMC. I passed 9 hours dos Memtest and 7 hours HCI Mamtest. And today after 20 or so minutes PC crashed while running this one. Bumped SoC by 1 tick and 1 hour Pass no problem smile.gif


https://www.techpowerup.com/232536/techpowerup-announces-memtest64-test-memory-from-within-windows#comments

lordzed83 is offline  
post #10523 of 40632 (permalink) Old 04-21-2017, 05:14 AM
New to Overclock.net
 
kundica's Avatar
 
Join Date: Sep 2014
Posts: 484
Rep: 34 (Unique: 17)
Quote:
Originally Posted by [email protected] View Post

In that case, the ProcODT is likely still wrong but the workaround is downclocking sufficiently to get you through the POST process. I'd still tune ProcODT on a system like that, as the stability margin may be limited.
Hmm... 48 ended up being the only stable option for me on 0079 so I'll give that a shot when I get home. I just assumed that was normal behavior since I saw several others reporting the same after cutting power from the system.
kundica is offline  
Sponsored Links
Advertisement
 
post #10524 of 40632 (permalink) Old 04-21-2017, 05:29 AM
Linux Lobbyist
 
Join Date: Sep 2010
Location: Missouri, USA
Posts: 2,655
Rep: 266 (Unique: 139)
Quote:
Originally Posted by lordzed83 View Post

I have not been checking topic for 2 days but this new Memtest by W1zzard came out.
Its BETTER than Dos memtest86 and windows HCI Memtest !!!!
Reason is... more stress on IMC. I passed 9 hours dos Memtest and 7 hours HCI Mamtest. And today after 20 or so minutes PC crashed while running this one. Bumped SoC by 1 tick and 1 hour Pass no problem smile.gif


https://www.techpowerup.com/232536/techpowerup-announces-memtest64-test-memory-from-within-windows#comments
Warning: Spoiler! (Click to show)

Hello

One needs to use the right tool for the right job. DOS based Memtest has been irrelevant for several years now when testing for in-operating system memory stability. With the exception of cache-memory interaction having a minor influence on testing HCI tests the memory subsystem only. Experience in tuning and an understanding of the components will dictate which test needs to be used to uncover and correct any instability of the system.
Praz is offline  
post #10525 of 40632 (permalink) Old 04-21-2017, 05:40 AM
 
Join Date: Mar 2016
Location: France/Armenia/US/Lebanon
Posts: 4,627
Curious as to who has fast boot enabled or disabled. Wondering if it will make a difference in my cold boot issue of it needing a reset once to boot up. Surprisingly changing the settings in BIOS. saving and restarting works fine haha.
bluej511 is offline  
post #10526 of 40632 (permalink) Old 04-21-2017, 05:41 AM - Thread Starter
New to Overclock.net
 
elmor's Avatar
 
Join Date: Mar 2014
Posts: 784
Rep: 291 (Unique: 127)
Beta software for P-state overclocking from OS

Can set P0/P1/P2 frequency and voltage, and is able to loading settings at boot. Should work on W7/8/10 x64. If you're on W7 you might have to install .NET 4.0.

To install, just run the main executable AsusZenStates.exe and it should take care of it.

* If you're on an earlier AGESA than 1004, you need to enable HPET in order to change P0 ratio or your system might go bonkers.

ASUS ZenStates 0.2.2

elmor is offline  
post #10527 of 40632 (permalink) Old 04-21-2017, 05:43 AM
New to Overclock.net
 
SpecChum's Avatar
 
Join Date: Oct 2014
Location: England
Posts: 953
Rep: 59 (Unique: 29)
Quote:
Originally Posted by elmor View Post

Beta software for P-state overclocking from OS

Can set P0/P1/P2 frequency and voltage, and is able to loading settings at boot. Should work on W7/8/10 x64. If you're on W7 you might have to install .NET 4.0.

ASUS ZenStates v0.1

Wow, that came outa nowhere.

Might give this a go tonight.

Thanks for this.

Only thing really stopping me from using 4.0Ghz is not so much that'd it needs 1.42v, that's fine, it's the 1.49v I'd need to set in BIOS to get there. 1 failed boot and I'd have 1.7v blasted through my chip redface.gif
SpecChum is offline  
post #10528 of 40632 (permalink) Old 04-21-2017, 05:47 AM
New to Overclock.net
 
TwoBeers's Avatar
 
Join Date: Mar 2017
Posts: 93
Rep: 13 (Unique: 4)
Quote:
Originally Posted by elmor View Post

Beta software for P-state overclocking from OS

Can set P0/P1/P2 frequency and voltage, and is able to loading settings at boot. Should work on W7/8/10 x64. If you're on W7 you might have to install .NET 4.0.

ASUS ZenStates v0.1

Cool, thx mate .. that was really unexpected. biggrin.gif
TwoBeers is offline  
post #10529 of 40632 (permalink) Old 04-21-2017, 06:04 AM
New to Overclock.net
 
badhairguy's Avatar
 
Join Date: Apr 2010
Location: St. Joseph, MO
Posts: 78
Rep: 5 (Unique: 2)
@elmor

I'm having some trouble with my Pstate overclock when in combination with 120.4 bclk overclock I was wondering if you could shed some light. I know from reading that Pstates and bclk are compatible and I've verified that with a 112.4mhz bclk, but when I try to raise bclk to 120.4, my x33.25 multiplier resets to x30 and won't increase further no matter what I set FID to. Is there a limit to bclk overclock using pstates or something else I need to know? I've repeated the process several times and I always get the same result.

EDIT - 0082 bios

badhairguy is offline  
post #10530 of 40632 (permalink) Old 04-21-2017, 06:08 AM
New to Overclock.net
 
kundica's Avatar
 
Join Date: Sep 2014
Posts: 484
Rep: 34 (Unique: 17)
Quote:
Originally Posted by elmor View Post

Beta software for P-state overclocking from OS

Can set P0/P1/P2 frequency and voltage, and is able to loading settings at boot. Should work on W7/8/10 x64. If you're on W7 you might have to install .NET 4.0.

To install, just run the main executable AsusZenStates.exe and it should take care of it.

ASUS ZenStates v0.1

This is great. How would we need to set things in bios for this to function?
kundica is offline  
Reply

Tags
Bios5 , profiles to usb

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off