ROG Crosshair VI overclocking thread - Page 744 - Overclock.net - An Overclocking Community

Forum Jump: 

ROG Crosshair VI overclocking thread

Reply
 
Thread Tools
post #7431 of 40620 (permalink) Old 04-07-2017, 12:18 AM
New to Overclock.net
 
Reikoji's Avatar
 
Join Date: Mar 2017
Posts: 872
Rep: 46 (Unique: 21)



Decided it was time to test Liquid Nitrogen on ram. Momentary all-time high ram speeds obtained!

Don't forget to ground yourself smile.gif

Reikoji is offline  
Sponsored Links
Advertisement
 
post #7432 of 40620 (permalink) Old 04-07-2017, 12:26 AM - Thread Starter
New to Overclock.net
 
elmor's Avatar
 
Join Date: Mar 2014
Posts: 784
Rep: 291 (Unique: 127)
Got some new BIOS so I'll pull the previous ones (obselete). All new BIOSes has the Voltage offset during recovery bug fixed. Would be very nice to get some feedback on which is working best for you guys in terms of DRAM compability.

Test BIOS 0079

Test BIOS with new AGESA 1004a, with a couple of bugfixes. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Test BIOS 0081

Same as 0079 but has ProcODT default = 53.3 ohm

Test BIOS 0082

Same as 0081 but with a DRAM compability patch for the below part numbers

CMK16GX4M4A2133C13
AHU08GGB13CGT7G
PV416G240C5QK
F4-2400C15Q-32GRR
TCD44G2400C14BK
F4-2666C16Q2-64GRB
AVD4UZ126661504G
BLT8G4D26AFTA.16FAD
IMA41GU6MFR8N-C F0
MD16GK4D4266615AXR
HX430C15PB2K4/16
HX430C15PBK4/32
AX4U3333W4G16-QGZ
GAM4DBLBM2133D15IE041C
TC48G24S817
SP004GBLFU213N02
78.C1GM3.AF10B
F4-3200C16D-8GVKB

MTA4ATF51264AZ-2G6B1
MTA8ATF1G64AZ-2G3B1
MTA16ATF2G64AZ-2G6B1
HMA41GU7AFR8N-TF T0
HMA451U7AFR8N-TF T0
HMA41GU6AFR8N-UH N0
M378A2K43BB1-CTD
M378A1K43BB1-CRC
M378A1G43EB1-CRC

Test BIOS 0083

Same as 0081 but with "2T" DRAM Mode when using above 2666 DRAM Ratio.
elmor is offline  
post #7433 of 40620 (permalink) Old 04-07-2017, 12:28 AM
New to Overclock.net
 
Sgt Bilko's Avatar
 
Join Date: Nov 2008
Location: NSW, Australia
Posts: 6,817
Rep: 354 (Unique: 199)
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Been waiting for this biggrin.gif

AMD Community Manager for ANZ


Sgt Bilko is offline  
Sponsored Links
Advertisement
 
post #7434 of 40620 (permalink) Old 04-07-2017, 12:28 AM
New to Overclock.net
 
Reikoji's Avatar
 
Join Date: Mar 2017
Posts: 872
Rep: 46 (Unique: 21)
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

P states with BCLK increase drool.gif

Restore bios defaults before flashing correct?

Don't forget to ground yourself smile.gif

Reikoji is offline  
post #7435 of 40620 (permalink) Old 04-07-2017, 12:29 AM
 
Join Date: Mar 2016
Location: France/Armenia/US/Lebanon
Posts: 4,627
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Would love to see anyone with corsair lpx that couldnt get to 3200mhz give this a try and see if it ends up going from 2933 to 3200 and staying there.
bluej511 is offline  
post #7436 of 40620 (permalink) Old 04-07-2017, 12:45 AM
New to Overclock.net
 
S1L3N7D3A7H's Avatar
 
Join Date: Jul 2012
Posts: 481
Rep: 36 (Unique: 25)
Quote:
Originally Posted by elmor View Post

New beta BIOS 1101

Still AGESA 1002. A couple of bugfixes, most importantly has the safe mode offset voltage fixed (not staying at previous value any more).

New test BIOS 0079

Test BIOS with new AGESA 1004a, based on 1101. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking, default value is 53.3 ohm. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Sounds great! Can we expect any new memory dividers coming down the pike?
S1L3N7D3A7H is offline  
post #7437 of 40620 (permalink) Old 04-07-2017, 01:02 AM
Meddling user
 
gupsterg's Avatar
 
Join Date: Jan 2015
Location: Lurking over a keyboard
Posts: 6,733
Rep: 730 (Unique: 342)
gupsterg is offline  
post #7438 of 40620 (permalink) Old 04-07-2017, 01:02 AM
New to Overclock.net
 
Reikoji's Avatar
 
Join Date: Mar 2017
Posts: 872
Rep: 46 (Unique: 21)
Guinea pig #unknown reporting.

The bug where if you change the Vid in Pstate the state will not change persists. Stuck in Pstate 3, 2402 mhz, 109.2 bclk

end report. /reboot

Don't forget to ground yourself smile.gif

Reikoji is offline  
post #7439 of 40620 (permalink) Old 04-07-2017, 01:10 AM
New to Overclock.net
 
ShiftyJ's Avatar
 
Join Date: Mar 2017
Posts: 60
Rep: 1 (Unique: 1)
Certain my boot time increased with 0079, was pretty slow before.
ShiftyJ is offline  
post #7440 of 40620 (permalink) Old 04-07-2017, 01:15 AM
Null
 
geoxile's Avatar
 
Join Date: Jul 2010
Posts: 6,297
Rep: 159 (Unique: 129)
Any way to have the ROG LEDs turn off when the PC is shutdown?

geoxile is offline  
Reply

Tags
Bios5 , profiles to usb

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 5 (2 members and 3 guests)
Lermite , Sideways2k
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off