A couple of comments related to a few posts I read while trying to catch up:
1. I was getting the provisioning error on the AMD power plan installer until I ran it from my Desktop. I was initially trying to run it from a network drive.
2. I need higher Vcore as well on 0081. When I checked with a DMM it seems like maybe the higher settings don't actually produce a higher voltage than 1002 (maybe there's an internal offset difference)
3. I'm excited to see people having some luck with the ODT setting. I'm going to play with that today.
For anyone unfamiliar with ODT, it's a termination setting for signal integrity purposes. It's not going to affect performance (directly) or degrade your chip but it will affect your ability to run at higher clock speeds. Both DRAM and DRAM controllers (IMCs) have ODT (on-die termination) resistors that are configurable to a few different settings. Nominal ODT values are often set based on trace impedances, but other factors often come into play. I can imagine things like: number of DIMMs installed, DIMM PCB design, VDIMM and VTT voltages, etc all having an effect on which ODT setting works best. I would shy away from very high settings because the signal will overshoot/ring a lot and potentially cause problems.