Asrock x399 Taichi/Fatality overclocking and unofficial support - Page 72 - Overclock.net - An Overclocking Community
Forum Jump: 

Asrock x399 Taichi/Fatality overclocking and unofficial support

Reply
 
Thread Tools
post #711 of 758 (permalink) Old 07-08-2019, 07:53 AM
New to Overclock.net
 
smke's Avatar
 
Join Date: Jun 2012
Location: osawatomie ks
Posts: 311
Rep: 10 (Unique: 5)
Quote: Originally Posted by shupp872 View Post
The Liqtechs TR4 and TR4 II are notorious for failing. I have personally gone through two of them, and my friend has gone through three, including the newer TR4 II (with RGB). The coolant gums up and starts blocking flow to the pump unit. Temps slowly climb. We had each had our units replaced by Enermax more than once for this issue. The last time it happened, i took my AIO apart and saw the gummy blockages first hand. My recommendation would be to just get rid of the unreliable product and go with a TR4 air cooler, or a custom loop. Unfortunately there are no other AIOs (that I am aware of) that have the full coverage blocks on them.

https://www.reddit.com/r/Amd/comment...iqtech_12_tr4/
what air cooler would you sugest

smke is offline  
Sponsored Links
Advertisement
 
post #712 of 758 (permalink) Old 07-08-2019, 09:23 AM
General Nerd
 
shupp872's Avatar
 
Join Date: Apr 2017
Location: Michigan, USA
Posts: 16
Rep: 1 (Unique: 1)
I would look at a few:

Cooler Master MAM-D7PN-DWRPS-T1 AMD Wraith Ripper

be quiet! Dark Rock Pro TR4

Noctua NH-U9 TR4-SP3
shupp872 is offline  
post #713 of 758 (permalink) Old 07-08-2019, 05:31 PM
BOINC Cruncher
 
Keith Myers's Avatar
 
Join Date: Mar 2017
Posts: 797
Rep: 30 (Unique: 20)
Quote: Originally Posted by shupp872 View Post
The Liqtechs TR4 and TR4 II are notorious for failing. I have personally gone through two of them, and my friend has gone through three, including the newer TR4 II (with RGB). The coolant gums up and starts blocking flow to the pump unit. Temps slowly climb. We had each had our units replaced by Enermax more than once for this issue. The last time it happened, i took my AIO apart and saw the gummy blockages first hand. My recommendation would be to just get rid of the unreliable product and go with a TR4 air cooler, or a custom loop. Unfortunately there are no other AIOs (that I am aware of) that have the full coverage blocks on them.

https://www.reddit.com/r/Amd/comment...iqtech_12_tr4/
The CoolerMaster TR4 ML360 has a full coverage cold plate. However the fin stack does not cover all the dies since it is based on the ubiquitous Asetek hardware. I agree with the assessment that only a custom cooling proper TR4 cpu block is the proper solution.

Serenity
(15 items)
Pipsqueek
(13 items)
Numbskull
(17 items)
CPU
Ryzen 3950X
Motherboard
ASUS ROG Crosshair VII Hero
GPU
EVGA RTX 2080 Hybrid
GPU
EVGA GTX 1080 Hybrid
GPU
EVGA RTX 2080 Hybrid
RAM
G. Skill F4-3200D-16GTZ TridentZ DDR4
Hard Drive
Crucial MX100
Hard Drive
Samsung 970 EVO M.2
Power Supply
Corsair AX1200
Cooling
Optimus Foundation AMD cpu block
Cooling
XSPC RX 360 radiator XSPC X4 Photon 170 pump/reservoir 3X Noctua NF-A12X25 fans
Case
Thermaltake Level 20 XT
Operating System
Ubuntu 18.04 LTS
Monitor
HP 27xw
Keyboard
Logitech M520 Keyboard/Mouse combo
CPU
AMD Ryzen 9 3900X
Motherboard
ASUS Crosshair VII Hero
GPU
NVIDIA GeForce GTX 1070Ti Hybrid
GPU
EVGA GTX 1070 Hybrid
GPU
EVGA RTX 2080 Hybrid
RAM
G.Skill F4-3200D-16GTZ
Hard Drive
Crucial MX100
Hard Drive
Samsung 970 EVO M.2
Power Supply
Corsair AX1200
Cooling
Corsair H110i AIO
Case
Corsair Air 540
Operating System
Ubuntu 18.04 LTS
Monitor
Dell U2315H
CPU
AMD 2920X Threadripper
Motherboard
Asrock X399 Fatality Pro Gaming
GPU
EVGA GeForce RTX 2070 Black Gaming
GPU
EVGA GeForce RTX 2070 Black Gaming
GPU
EVGA GTX 1080Ti FTW Hydro
GPU
EVGA RTX 2080XC Hydro Copper
RAM
G. Skill F4-3200C14-16GTZ
RAM
G. Skill F4-3200C14-16GTZ
Hard Drive
Samsung M.2 960EVO
Hard Drive
Crucial MX200
Cooling
XSPC Raystorm Pro Neo Threadripper block
Cooling
XSPC X4 Photon 170 Pump/Reservoir times two
Cooling
XSPC RX360 Radiator times two
Cooling
Noctua NF-A12x25 fan
Case
Thermaltake Core X5 Black E-ATX
Operating System
Ubuntu 18.04 LTS
Monitor
AOC 2367F
▲ hide details ▲
Keith Myers is offline  
Sponsored Links
Advertisement
 
post #714 of 758 (permalink) Old 07-09-2019, 06:31 AM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 5
Rep: 0
After a great deal of tuning, I just don't think the IMC on this particular CPU is going to allow for stability at 3200. I accepted that getting four sticks of dual sided dual rank RAM to 3133 in a quad channel config would be the best I could do for now.

This was the final build:

https://leenabutt.com/halal-recipes/...-dream-machine

Thank you all again for your input and support!
yousearch is offline  
post #715 of 758 (permalink) Old 07-16-2019, 06:28 PM
New to Overclock.net
 
smke's Avatar
 
Join Date: Jun 2012
Location: osawatomie ks
Posts: 311
Rep: 10 (Unique: 5)
I came up with a better cooler then that enermax thing I took my old EK preditor 240
and put a EK Supremacy sTR4 RGB block and my ideal temps are 55-60c and did a cyne r20 run and it went to 90c

smke is offline  
post #716 of 758 (permalink) Old 07-28-2019, 10:39 AM
New to Overclock.net
 
dalathegreat's Avatar
 
Join Date: Oct 2017
Posts: 33
Rep: 0
Quote: Originally Posted by yousearch View Post
After a great deal of tuning, I just don't think the IMC on this particular CPU is going to allow for stability at 3200. I accepted that getting four sticks of dual sided dual rank RAM to 3133 in a quad channel config would be the best I could do for now.

This was the final build:

https://leenabutt.com/halal-recipes/...-dream-machine

Thank you all again for your input and support!
Nice build!

I recently started re-trying the tuning of my max memory speed with this guide: https://github.com/integralfx/MemTes...0OC%20Guide.md

I went from 3333mhz quad -> 3466mhz stabilization ongoing! Fricking awesome!

Threadripper [email protected] - Asrock X399 Taichi - Corsair Dominator 4x4GB [email protected] - nVidia GTX1080 TI - Samsung EVO 960 512GB - Seasonic Prime 670W
dalathegreat is offline  
post #717 of 758 (permalink) Old 08-12-2019, 03:25 AM
New to Overclock.net
 
radier's Avatar
 
Join Date: Jan 2011
Posts: 265
Rep: 21 (Unique: 15)
Fatal1ty X399 Professional Gaming 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P2.10, please update BIOS to P2.10(Bridge BIOS) before updating this version. Download

X399 Phantom Gaming 6 1.20 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2 Download

X399 Taichi 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P2.30, please update BIOS to P2.30(Bridge BIOS) before updating this version. Download

X399M Taichi 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P1.10, please update BIOS to P1.10(Bridge BIOS) before updating this version. Download

http://www.asrock.com/support/index.asp?cat=BIOS

i5 2500K (L041C124) @ 5GHz + Scythe Mugen 2 rev.B | ASRock P67 Extreme4 B3 UEFI L3.19 | G.Skill 2x8GB DDR3 2133 | MSI Radeon RX 470 4GB | ADATA SP920 256GB SSD , Seagate BarraCuda 1TB, Samsung F4EG 2TB | 24" HP LP2475w | EVGA SuperNOVA G2 750W | Fractal Design Define R3 | Windows 10 64bit
radier is offline  
post #718 of 758 (permalink) Old 08-12-2019, 11:54 AM
New to Overclock.net
 
dalathegreat's Avatar
 
Join Date: Oct 2017
Posts: 33
Rep: 0
Nice! Now I can disable spread spectrum and see if I can push the OC higher!

Threadripper [email protected] - Asrock X399 Taichi - Corsair Dominator 4x4GB [email protected] - nVidia GTX1080 TI - Samsung EVO 960 512GB - Seasonic Prime 670W
dalathegreat is offline  
post #719 of 758 (permalink) Old 08-12-2019, 02:19 PM
New to Overclock.net
 
Nizzen's Avatar
 
Join Date: Apr 2013
Location: Norway
Posts: 1,779
Rep: 62 (Unique: 51)
Quote: Originally Posted by radier View Post
Fatal1ty X399 Professional Gaming 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P2.10, please update BIOS to P2.10(Bridge BIOS) before updating this version. Download

X399 Phantom Gaming 6 1.20 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2 Download

X399 Taichi 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P2.30, please update BIOS to P2.30(Bridge BIOS) before updating this version. Download

X399M Taichi 3.60 8/12/2019 Update AMD AGESA ThreadRipperPI-SP3r2 1.1.0.2
* If the current BIOS version is older than P1.10, please update BIOS to P1.10(Bridge BIOS) before updating this version. Download

http://www.asrock.com/support/index.asp?cat=BIOS
Tnx for the headsup!
Nwe bios for my x399 fatality pro 😄

CPU24/7) 7980xe - 7900xMOBO: ASUS Rampage Apex x299 / Asrock Taichi x299RAM: 4x 3600c15 / 4x4266c19/ 4x4000 c17 GPU: 2x MSI tri X 2080ti / 1060tiSTORAGE: Areca 1883i HDD R6 + Samsung 850PROs R0 - 3x SM961 nvme 1TB - 3x Intel Optane 900p 480GBCASE: LD cooling V8 R/B / ld cooling reverse R/BMonitor: Acer x34 /Asus 27 AQ 4k g-sync / Asrock x570 Taichi / 3900x
Nizzen is offline  
post #720 of 758 (permalink) Old 08-21-2019, 03:30 PM
New to Overclock.net
 
Causality1978's Avatar
 
Join Date: Feb 2013
Posts: 225
Rep: 11 (Unique: 11)
will update tomorow on my taichi x399 , 2990wx,, still use 2133mhz ram but now i hope with new agesa is reason go to new ram.
wait for you , how high get you ram clock? witch memory kit is recomended? 32 gb,, ÆØ

Causality1978 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off