ASUS ROG X570 Crosshair VIII Overclocking & Discussion Thread - Page 116 - Overclock.net - An Overclocking Community

Forum Jump: 

ASUS ROG X570 Crosshair VIII Overclocking & Discussion Thread

Reply
 
Thread Tools
post #1151 of 1180 (permalink) Old 10-10-2019, 12:06 AM
New to Overclock.net
 
Join Date: Oct 2019
Posts: 4
Rep: 0
Just gotta say I spent two days reading this entire thread. I wish I found it earlier. Several roadblocks are solved here which I struggled with on my own, and had I known about this thread, it would have saved me a lot of time! BUT as a byproduct of my efforts, I have learned much about the board (CH8W). I ended up here because I was looking into an issue with my corsair mp600 underperforming on write speeds. Funny enough, there was only a single mention of issues like this here, yet it is the two major threads on the Corsair SSD forum. As stated above, the latest chipset driver from AMD seems to have fixed that problem.

Either way, what I've learned on my own has been validated by many of you, and many of you have provided lots of information that I didn't know as well. The last amd chip I had was a K6-2 450, so I'm learning to navigate these waters all over again. Lol. You have my respect and appreciation! Thank you!

Sent from my SM-G965W using Tapatalk
SeeGee is offline  
Sponsored Links
Advertisement
 
post #1152 of 1180 (permalink) Old 10-10-2019, 01:06 PM
complaints > /dev/null
 
neurotix's Avatar
 
Join Date: Feb 2010
Location: The frozen North
Posts: 4,079
Rep: 287 (Unique: 176)
Quote: Originally Posted by SeeGee View Post

Either way, what I've learned on my own has been validated by many of you, and many of you have provided lots of information that I didn't know as well. The last amd chip I had was a K6-2 450, so I'm learning to navigate these waters all over again. Lol. You have my respect and appreciation! Thank you!

Sent from my SM-G965W using Tapatalk
K6-2 350Mhz was the first processor I ever overclocked. I was in high school. 98.

Socket 7 I think. It was in a HP Prebuilt. I looked up the model number, and found out what motherboard it had, then found the manual for that motherboard on Foxconns website. Printed it off.

You overclocked that one by capping rows of jumpers to the right of the socket to change the cpu multiplier, lol. It was 3 horizontal rows by 4 vertical rows of 3 pin jumpers (similar to modern cmos jumpers and 12 total). Depending on how you capped them, it would set the multiplier you wanted. The manual I printed had a chart.

I got it from 350MHz to 450MHz which is a 77% overclock. (Mannnnn I wish we could get that on a 3900x!) I kept the stock (tiny) heatsink and added a slightly larger fan that was attached by a single screw and hung over the sink. lol I think the stock fan was like 40mm and I swapped a 60mm fan onto it. That oc made a big difference for what I was doing then, Snes and Neo Geo emulators, and made the difference between 45 fps and a solid 60.

Anyhow thought you might appreciate this- good luck on your build and OC, memory OC, etc. Heres hoping you get that 77% OC on air (Lol). If you need help or advice I'll be around.

Big Red 2020
(34 items)
Big Blue?
(14 items)
Macintosh SE (1987)
(19 items)
CPU
Ryzen 9 3900X @ 4.4GHz CCD0 1.36v, 4.2GHz CCD1, locked, 1900Mhz fclk
Motherboard
ASUS ROG Crosshair VIII Hero BIOS 1001
GPU
EVGA GTX 1080ti FTW3 2012/5760MHz
GPU
EVGA GTX 1080ti FTW3 2012/5760MHz
RAM
G.SKILL Flare X B-Die 3200 C14 @ 3800MHz 16-16-16-32-50 1T 1.42v ;)
Hard Drive
Samsung 970 Evo 500GB m.2 2280 PCI-E NVMe SSD
Hard Drive
WD Black 2TB
Hard Drive
WD Blue 4TB
Hard Drive
WD Blue 6TB
Hard Drive
Samsung 840 Evo SATA 256GB
Optical Drive
Lite-On DVD-RW
Power Supply
COOLERMASTER V1000
Cooling
Corsair H100i V2 (plastidipped red tubing)
Cooling
Arctic Bionix F120 red (radiator), Bionix F140 red (rear), Bionix P140 3k RPM (front)
Cooling
Prolimatech PK-3 Nano 30g tube
Cooling
G.skill OG DDR3 Memory Cooler, white LED
Cooling
Corsair red LED 140mm fan, blowing on board socket + VRMs from behind
Case
Corsair 780T w/ custom red paint
Operating System
Debian Linux 10
Operating System
Win10 X64 Pro 1903 (gaming only), stripped down, updates blocked, Firewalled.
Monitor
3x ASUS V239 23" 1080p IPS Surround, 60Hz
Keyboard
Ducky One 2 RGB PKT MX Reds
Keyboard
OCN Ducky DK1008 MX Blues
Keyboard
Corsair K70 Lux red led/MX Reds
Mouse
Redragon Chroma M710 RGB (Omron Switches)
Mousepad
Corsair Polaris RGB
Audio
Logitech G230 red
Audio
Logitech Z2300 2.1 120w 8" sub, w/ 40w satellites
Other
Logisys red LED "Meteor Light"
Other
Custom acrylic PSU shroud "Big Red" (black w/ red led logo, v1tech)
Other
Custom acrylic drive cage shroud "[email protected]" (black w/ red logo. Clockwerkindustries)
Other
Thermaltake TTmod combed red/black cable extensions
Other
"Republic of Gamers", "EVGA" case badges.
Other
Merax Red/Black Racing Chair
CPU
i5-7600k 4.7ghz 1.26v
Motherboard
ASUS ROG Z270H Strix
GPU
Sapphire R9 380X Nitro 1200/1500mhz
RAM
G.skill Ripjaws4 DDR4-3000 CAS15
Hard Drive
Western Digital Caviar Blue 320gb
Hard Drive
Samsung 850 Evo 256gb
Power Supply
OCZ ModXStream Pro 500w
Cooling
Corsair H60
Case
Thermaltake Core V71
Operating System
Win10 Home
Monitor
2x ASUS V236H 1080p
Keyboard
Corsair K70 Lux Blue LED Cherry MX Blue
Mouse
Cooler Master
Mouse
Thermaltake GAMMA
CPU
Motorola 68000 @ 7.8MHz
Motherboard
Macintosh SE logic board
Motherboard
Macintosh SE analog board (provides voltage + timing to CRT)
GPU
None. Graphics generated by ROM, OS and 68k (sans fpu)
RAM
NEC Electronics 80ns 9-chip 1MB SIMMs (four, 4MB total RAM)
Hard Drive
FloppyEmu Ver C in clear case, front-mounted, 500MB HFS .dsk file
Optical Drive
Sony 800KB Double-Sided floppy disk drive. Cleaned and relubricated
Power Supply
stock, 75W
Cooling
Single fan. Very small. (25mm?)
Cooling
Cage in the case itself provides convection cooling.
Case
Macintosh SE, platinum color, Snow White design language
Operating System
System Software 6.0.8 w/ Multifinder
Operating System
System Software 7.1 (rarely used; needed for Macintalk 2 speech synthesis)
Monitor
9" 1-bit (black and white) CRT, 512x342, 58Hz
Keyboard
Apple Desktop Bus Keyboard 1 (cleaned and restored.)
Mouse
Apple Desktop Bus Mouse 1 (cleaned)
Audio
Mono Speaker
Other
"Macintosh Toolbox" 128Kb ROM chip- accelerates OS/System calls
Other
Replaced soldered 3.6V PRAM battery liable to explode/leak w/ 3V lithium coin cell meant for Gameboy games.
▲ hide details ▲


neurotix is offline  
post #1153 of 1180 (permalink) Old 10-10-2019, 04:09 PM
New to Overclock.net
 
Join Date: Oct 2019
Posts: 4
Rep: 0
Quote: Originally Posted by neurotix View Post
K6-2 350Mhz was the first processor I ever overclocked. I was in high school. 98.



Socket 7 I think. It was in a HP Prebuilt. I looked up the model number, and found out what motherboard it had, then found the manual for that motherboard on Foxconns website. Printed it off.



You overclocked that one by capping rows of jumpers to the right of the socket to change the cpu multiplier, lol. It was 3 horizontal rows by 4 vertical rows of 3 pin jumpers (similar to modern cmos jumpers and 12 total). Depending on how you capped them, it would set the multiplier you wanted. The manual I printed had a chart.



I got it from 350MHz to 450MHz which is a 77% overclock. (Mannnnn I wish we could get that on a 3900x!) I kept the stock (tiny) heatsink and added a slightly larger fan that was attached by a single screw and hung over the sink. lol I think the stock fan was like 40mm and I swapped a 60mm fan onto it. That oc made a big difference for what I was doing then, Snes and Neo Geo emulators, and made the difference between 45 fps and a solid 60.



Anyhow thought you might appreciate this- good luck on your build and OC, memory OC, etc. Heres hoping you get that 77% OC on air (Lol). If you need help or advice I'll be around.
Oh for sure! I ran mine @550mhz. I've been building systems since the days of XT'S. My first PC had 640k ram, 5mb RLL hard drive, and a whopping 4.77mhz. Needless to say that I recognize how *bleeping* awesome modern hardware is. It's just been a looong time since I've had an AMD. Funny enough, AMD caused the same level of disruption to intel with those K6-2 chips as it is with the 3000s today.

Remember Cyrix? (Shudder...)
I digress.

Sent from my SM-G965W using Tapatalk
SeeGee is offline  
Sponsored Links
Advertisement
 
post #1154 of 1180 (permalink) Old 10-10-2019, 05:40 PM
( ━☞´◔‿ゝ◔`)━ ☞
 
Kokin's Avatar
 
Join Date: Feb 2010
Location: Bay Area
Posts: 6,473
Rep: 425 (Unique: 364)
Hey all,

My parts are almost all in, but I will be updating my rig and my fiancee's rig from our 3570Ks and Z77 boards:

1) 3900X + ROG Crosshair VIII Impact + 32GB TridentZ 3200CL14 B-die RAM + 2x 2TB Inland PCIe NVMe in RAID 0 (custom loop)
2) 3600X + Strix X570-I Gaming + 32GB Ripjaws V B-die RAM + 1x 2TB Inland PCIe NVMe (air cooled)

-What version of Windows 1903 would you all recommend downloading or is there a newer version that's better for stability/core scheduling/idle power?
-I've never done any RAID setups before and someone in Discord told me that I need to download all 4 RAID drivers and install them during Windows installation in order to get RAID 0 working for the Impact. Has anyone else done RAID 0 on the C8I and can confirm that process?

Excited to finally upgrade our platforms after 7 years!

Black Heart
(21 items)
CPU
Intel i5 3570K [Delid]
Motherboard
Asrock Z77E-ITX
GPU
EVGA GeForce GTX 1080Ti FTW3
RAM
HyperX Fury 16GB 1866 DDR3 HX318C10FBK2/16
Hard Drive
Crucial M4 256GB
Hard Drive
Crucial MX500 2TB
Hard Drive
Western Digital Blue Scorpio 1TB
Hard Drive
Seagate Constellation 2 1TB
Power Supply
Seasonic Prime 600W Titanium Fanless
Cooling
XSPC RX240+EX240 [Painted White]
Cooling
5x 2150RPM Gentle Typhoons PWM [Painted Black+White]
Cooling
EK Supremacy EVO RGB + EK FC1080Ti FTW3 blocks
Cooling
Phanteks Glacier R160 + MCP35X
Case
Case Labs Mercury S3
Operating System
Windows 10
Monitor
Alienware AW3418DW 34" Ultrawide 3440x1440 120Hz G-Sync
Monitor
Qnix QX2710 1440p 120Hz
Keyboard
WASD CODE 87-Key [MX Clear + /dev/tty Keycaps]
Mouse
Logitech G502
Audio
Sennheiser HD 6XX
Audio
Micca OriGen G2
▲ hide details ▲
Kokin is offline  
post #1155 of 1180 (permalink) Old 10-11-2019, 01:31 AM
New to Overclock.net
 
jaimbo's Avatar
 
Join Date: Mar 2013
Posts: 6
Rep: 0
Quote: Originally Posted by mendesic View Post
Realy seems like a board issue.
Yeah that was the end thought I came to, tested my memory in another PC since on other boards Q-Code 07 is RAM related, RAM works fine in another system so have RMA'd the board. In the middle of buying a house/moving right now so not the best time but meh, what can you do?
jaimbo is offline  
post #1156 of 1180 (permalink) Old 10-11-2019, 06:51 AM
New to Overclock.net
 
TJGun's Avatar
 
Join Date: Aug 2019
Posts: 5
Rep: 0
I just replaced my Trident Z RGB 3200CL14 with a 3600CL16 Neo kit.
The system was stable at 3733CL16 with the RGB kit but since installing the Neo kit the system occasionally freezes and reboots. I've run Karhu RAM test to 6000% with no errors.

I thought the Neo kit should be higher binned?

Any suggestions?

Ryzen
(12 items)
CPU
Ryzen 9 3900x
Motherboard
Crosshair VIII Hero
GPU
RTX 2080 Super Gaming x Trio
RAM
G.Skill Trident Z NEO @ 3733CL16
Hard Drive
Samsung 970 EVO Plus 1TB M.2
Power Supply
Corsair RM850x
Cooling
Noctua NH-D15s
Case
Fractal Design Define R6 Blackout
Monitor
Dell U3417W
Keyboard
Vortex POK3R
Mouse
G502
Audio
KEF LS50 & NAD 3020
▲ hide details ▲
TJGun is offline  
post #1157 of 1180 (permalink) Old 10-11-2019, 08:21 AM
New to Overclock.net
 
Join Date: Aug 2019
Posts: 13
Rep: 2 (Unique: 2)
Quote: Originally Posted by TJGun View Post
I just replaced my Trident Z RGB 3200CL14 with a 3600CL16 Neo kit.
The system was stable at 3733CL16 with the RGB kit but since installing the Neo kit the system occasionally freezes and reboots. I've run Karhu RAM test to 6000% with no errors.

I thought the Neo kit should be higher binned?

Any suggestions?
Did you run the test with the stress fpu option ticked in advanced options? If not try that as that stresses the IF as well. If you get an error try increasing soc voltage.
Badgerslayer7 is offline  
post #1158 of 1180 (permalink) Old 10-11-2019, 08:43 AM
New to Overclock.net
 
TJGun's Avatar
 
Join Date: Aug 2019
Posts: 5
Rep: 0
Did not run with the fpu option ticked, I'll try that now.
The SOC is already at 1.1.

Ryzen
(12 items)
CPU
Ryzen 9 3900x
Motherboard
Crosshair VIII Hero
GPU
RTX 2080 Super Gaming x Trio
RAM
G.Skill Trident Z NEO @ 3733CL16
Hard Drive
Samsung 970 EVO Plus 1TB M.2
Power Supply
Corsair RM850x
Cooling
Noctua NH-D15s
Case
Fractal Design Define R6 Blackout
Monitor
Dell U3417W
Keyboard
Vortex POK3R
Mouse
G502
Audio
KEF LS50 & NAD 3020
▲ hide details ▲
TJGun is offline  
post #1159 of 1180 (permalink) Old 10-11-2019, 09:00 AM
New to Overclock.net
 
Join Date: Aug 2019
Posts: 13
Rep: 2 (Unique: 2)
Quote: Originally Posted by TJGun View Post
Did not run with the fpu option ticked, I'll try that now.
The SOC is already at 1.1.
Mine passed the normal test at 1.1v soc but failed with fpu selected. I increased mine to 1.125 and it passed.
Badgerslayer7 is offline  
post #1160 of 1180 (permalink) Old 10-11-2019, 10:19 AM
New to Overclock.net
 
TJGun's Avatar
 
Join Date: Aug 2019
Posts: 5
Rep: 0
Ticked fpu, ran it to 3200% with 0 errors.

Ryzen
(12 items)
CPU
Ryzen 9 3900x
Motherboard
Crosshair VIII Hero
GPU
RTX 2080 Super Gaming x Trio
RAM
G.Skill Trident Z NEO @ 3733CL16
Hard Drive
Samsung 970 EVO Plus 1TB M.2
Power Supply
Corsair RM850x
Cooling
Noctua NH-D15s
Case
Fractal Design Define R6 Blackout
Monitor
Dell U3417W
Keyboard
Vortex POK3R
Mouse
G502
Audio
KEF LS50 & NAD 3020
▲ hide details ▲
TJGun is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 4 (1 members and 3 guests)
MacG32
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off