Gigabyte X570 Aorus Xtreme Owners Club - Page 8 - Overclock.net - An Overclocking Community

Forum Jump: 

Gigabyte X570 Aorus Xtreme Owners Club

Reply
 
Thread Tools
post #71 of 90 (permalink) Old 08-10-2019, 04:33 AM
New to Overclock.net
 
Join Date: Jul 2019
Posts: 4
Rep: 0
I updated windows last night and now about 4 cores will hit 4.5. I haven't changed anything in BIOS since update. However, when I run cb15 all cores stop at 4.0. You notice anything like this nighthog?
oakfig is offline  
Sponsored Links
Advertisement
 
post #72 of 90 (permalink) Old 08-10-2019, 05:41 AM
New to Overclock.net
 
Join Date: Feb 2017
Location: Sweden
Posts: 698
Rep: 25 (Unique: 22)
Quote: Originally Posted by oakfig View Post
I updated windows last night and now about 4 cores will hit 4.5. I haven't changed anything in BIOS since update. However, when I run cb15 all cores stop at 4.0. You notice anything like this nighthog?
I have about ~2cores on my sample that can hit ~4.5Ghz @ stock PB usually but all-core boost depends on your cooling as it's temperature sensitive. I think the threshold is ~80C mentioned about here elsewhere when the algorithm will start to lower boost to try find a balance.
If your temps are high it isn't unusual to get low boost in all-core load.
I have custom water and I would get ~4.3Ghz tops in CB R15 @ stock. R20 was around ~4.225-4.250Ghz if I recall correctly.

NEWEST: Gigabyte X570 AORUS XTREME, Ryzen 7 3800X 4.4Ghz, 3800/1900 1:1 MEM, 16.23.17.32.66.tRFC 580 1T 1.45V
4x8Gb Kingston HX434C19FB2K2/16 3466C19 1.2V (Micron E-die 16nm)
OLD: Biostar x470GT8 Ryzen 7 1700 @ ~4.0Ghz CPU, 3200Mhz RAM ...
Nighthog is offline  
post #73 of 90 (permalink) Old 08-11-2019, 06:40 AM
New to Overclock.net
 
Join Date: Feb 2017
Location: Sweden
Posts: 698
Rep: 25 (Unique: 22)
DELETE it broke....

EDIT: had a discourse on how PBO was working but a bios setting change and reboot it stopped working... great...

Either way PBO - 1-10X scalar adjusts the voltage in 0.006V steps for multi-core load... 10x = +0.060V for multicore but something broke and it didn't boost any more, just increased the voltage.
At first it also gave ~50Mhz extra for all core boost but that vanished after a change and I can't get it back to boost. Just increases voltage and temperature but still same boost behaviour as stock.
It didn't effect single-core boost only multicore boost when it was boosting.

Was a 100% fresh BIOS from a Q-flash F3I BIOS

Really sad even if it was a modest boost. Thinking it actually worked fine for once but seems it breaks with some other settings and doesn't get back to working afterwards when changing back.

NEWEST: Gigabyte X570 AORUS XTREME, Ryzen 7 3800X 4.4Ghz, 3800/1900 1:1 MEM, 16.23.17.32.66.tRFC 580 1T 1.45V
4x8Gb Kingston HX434C19FB2K2/16 3466C19 1.2V (Micron E-die 16nm)
OLD: Biostar x470GT8 Ryzen 7 1700 @ ~4.0Ghz CPU, 3200Mhz RAM ...

Last edited by Nighthog; 08-11-2019 at 07:31 AM.
Nighthog is offline  
Sponsored Links
Advertisement
 
post #74 of 90 (permalink) Old 08-11-2019, 08:07 AM
New to Overclock.net
 
Grin's Avatar
 
Join Date: May 2017
Location: USA
Posts: 112
Rep: 5 (Unique: 5)
So it’s seems like 3800x is working as promised, hopefully 3950x will be better binned and will be able to reach 4.7. My feelings that 7nm is a newborn so maybe I’ll wait until next stepping will be released on 7p.
Grin is offline  
post #75 of 90 (permalink) Old 08-11-2019, 12:01 PM - Thread Starter
Founder
 
LiquidHaus's Avatar
 
Join Date: Nov 2008
Location: SLC, Utah
Posts: 1,978
Rep: 78 (Unique: 72)
On a separate note...

Has anyone figured a trick out to unlink the ARGB ports and/or the RGB ports within RGBFusion?



I'm finding it quite annoying that these ports need to link up and be the same color. Should be able to set colors individually from one another.

Any help would be great, thanks!

www.liquid.haus
Team Heatkiller
LiquidHaus is offline  
post #76 of 90 (permalink) Old 08-15-2019, 09:02 AM
New to Overclock.net
 
Join Date: Sep 2013
Posts: 2,085
Rep: 42 (Unique: 34)
Does Gigabyte make an Auros Extreme TR board?

EDIT: nm, just checked..

I'm thinking of selling off my X570 board and waiting for TR and getting the Auros Extreme TR4


Last edited by OCmember; 08-15-2019 at 09:13 AM.
OCmember is offline  
post #77 of 90 (permalink) Old 08-15-2019, 11:26 AM
New to Overclock.net
 
Martin778's Avatar
 
Join Date: Feb 2012
Location: the Netherlands
Posts: 1,350
Rep: 15 (Unique: 15)
Too many unknowns on the upcoming Threadippers yet.

By the way - the F3i BIOS doesn't work well here, when rebotting it sometimes takes 2-3 tries before the motherboard POSTs, even without OC. I can make a short vid on which codes it cycles if needed.

Core i9 9900K @ 5.2 || EVGA Z390 DARK || 2x8GB G.Skill TridentZ RGB 4600 C18 @ 4266 C17 || GPU: EVGA Kingpin RTX2080Ti @ 2130MHz || Samsung 970PRO 1TB + 860EVO 2TB || Lian Li O11 Dynamic White || Corsair AX1600i || Screen: LG B8 OLED 55 and LG 34GK950F
Corsair H150i PRO + Noctua NF-A12x25
Martin778 is offline  
post #78 of 90 (permalink) Old 08-15-2019, 04:57 PM - Thread Starter
Founder
 
LiquidHaus's Avatar
 
Join Date: Nov 2008
Location: SLC, Utah
Posts: 1,978
Rep: 78 (Unique: 72)
Quote: Originally Posted by OCmember View Post
Does Gigabyte make an Auros Extreme TR board?

EDIT: nm, just checked..

I'm thinking of selling off my X570 board and waiting for TR and getting the Auros Extreme TR4
I just came from Threadripper.

Based on how the 2nd gen Non X Threadrippers were rebranded first gens with higher frequencies, and the X's were the actual 2nd gens but with way higher core counts, I just couldn't stomach anything more than 16 cores and pay extra for something that wouldn't be utilized.

That is exactly what will happen here with the 3rd gen Threadripper.

What is the point of a new Threadripper that is 12 core or 16 core now? The ONLY thing that will mean much is if they retain their 60+4 pcie lanes.

Which means those who want TR this time around are looking to replace their current 20+ core setups and 90% of people don't need that many cores.

I loved Threadripper and the idea of it, and I loved that performance got a ton better since release, over many updates and that they didn't give up on it, but with Ryzen 3000 and the upcoming 3950X, the initial target market for 1st gen TR will be lost.

And their sales numbers just won't be the same.

www.liquid.haus
Team Heatkiller
LiquidHaus is offline  
post #79 of 90 (permalink) Old 08-16-2019, 03:44 AM
New to Overclock.net
 
Join Date: Feb 2017
Location: Sweden
Posts: 698
Rep: 25 (Unique: 22)
I've gotten 4600/1900 Memory to boot and run some preliminary testing that it can be workable in 2x8Gb configuration.

Just need to tune timings and such as I ran them up to see what frequencies where possible.

4x8Gb I could only run up-to 4066Mhz bootable/stable thus far.

Seems these memory kits I had were better than I had thought possible and had more to give.

Currently on 18-27-20-20-56-90 for example @ 4600Mhz. CL18 needs 1.53Volts at this speed.

Still the same Micron E-die.

NEWEST: Gigabyte X570 AORUS XTREME, Ryzen 7 3800X 4.4Ghz, 3800/1900 1:1 MEM, 16.23.17.32.66.tRFC 580 1T 1.45V
4x8Gb Kingston HX434C19FB2K2/16 3466C19 1.2V (Micron E-die 16nm)
OLD: Biostar x470GT8 Ryzen 7 1700 @ ~4.0Ghz CPU, 3200Mhz RAM ...
Nighthog is offline  
post #80 of 90 (permalink) Old 08-16-2019, 07:09 PM
New to Overclock.net
 
Join Date: Sep 2013
Posts: 2,085
Rep: 42 (Unique: 34)
So considering I'll be on PCIe 4.0 either way, what NVMe drive would be better? Strictly for a gaming rig: the Samsung 970 1Tb Pro, or the Aorus 1TB NVMe PCIe 4.0 drive?

EDIT: The 970 Pro has the lowest latency in a high percentage of tests while the Aorus has the highest Read and Writes. I don't know if either of these would help in any way for a gaming rig.


Last edited by OCmember; 08-16-2019 at 07:13 PM.
OCmember is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off