Originally Posted by Kanuki
I just received this board yesterday. It took time for me to get use to the BIOS GUI.
So far everything seem to be good but I ran into a small problem.
I tried to overclock my RAM from 3200MHz to 3400MHz 14-14-14-14-28-1T.
Everything is almost okay but I can't get 1T command to work.
Somehow it stuck at 2T command. I didn't have this problem with ASUS Crosshair VI Hero.
(overall memory latency is lower than when I used ASUS Crosshair VI Hero.)
I've already updated the latest BIOS v1.92.
BIOS v.1.92 is a Beta BIOS so that could very well be the case. As for the RAM overclocking you may have to either raise the voltage a hair or loosen up the timings. Although whatever you may have gained from the speed increase you may lose by making the timings looser. You already have fast RAM but you did not say what die it is so who knows if it even really would be able to hit 3400 at those timings.
Edit: I tried this BIOS and immediately flashed back to the v.1.8 BIOS as my RAM would no longer clock to 3800 and remain stable, it had been stable since the beginning of the year at that speed.
MSI MEG X570 Ace
AMD Ryzen 9 3900x
Corsair H115i Platinum, Corsair Crystal 570x RGB Case
32GB Corsair Vengence RGB Pro 3600 @3800
MSI Geforce RTX 2080 Super Ventus SX OC w/ Acer Predator X34P
Last edited by jamie1073; 05-13-2020 at 09:56 AM.