(Gigabyte X570 AORUS Master Overclocking Thread) - Page 2 - Overclock.net - An Overclocking Community

Forum Jump: 

(Gigabyte X570 AORUS Master Overclocking Thread)

Reply
 
Thread Tools
post #11 of 118 (permalink) Old 08-06-2019, 07:00 PM - Thread Starter
New to Overclock.net
 
Heuchler's Avatar
 
Join Date: Mar 2012
Posts: 2,001
Rep: 273 (Unique: 192)
Removed the setting CPU Multiplier part. I did have a BIOS corruption when I started messing with it and Ryzen Master last night. But it was fine on Auto, 36.00 and 42.00 only till I started messing with Ryzen Master did I have a issue.

Nice collection of Samsung B-die DIMMs and SSDs. 3800X with 32GB @3800 nice as well. I originally was thinking 3700X with my X370 but with 3733 (3700 would have been nicer but only in a single aspect).


Edit: miss my Samsung NMVe drive as it had no issue with PCIe @103 MHz for years. Might have to use to in this build.

Overclocking History (Click to show)
Intel 386DX/16 @ 20 MHz
CX486SLC/50 @ 50 MHz
AM486DX2/80 @ 100 MHz
AM486 DX4-100 @ 120 MHz
AK5x86-P75 [email protected] 160 MHz
Pentium 90 @ 120 Mhz
IBM 6x86L P166+ [email protected] 160 MHz
Celeron 300a @ 454 MHz
Pentium 3 700 @ 933 MHz
Athlon XP 1400+ @ 1600 MHz
Athlon XP 1800+ @ 2088 MHz
Athlon XP 2500+ @ 2200 MHz
Athlon 64 3000+ @ 2603 MHz
Athlon X2 BE2300 @ 1900 MHz
Athlon X2 4200+ @ 2210 MHz
Athlon X2 5000+ @ 2600 MHz
Core 2 Duo E4300 @ 3000 MHz
Core 2 Duo E6750 @ 3600 MHz
Core 2 Duo E8400 @ 4000 MHz
Xeon C2Q L5408 @ 3200 MHz
Xeon C2Q X5450 @ 3300 MHz
Xeon C2Q E5440 @ 3400 MHz
Xeon C2Q E5450 @ 3600 MHz
Phenom2 X4 B50 @ 3700 MHz
Phenom2 X6 1045T @ 4050 MHz
Core i5-2500K Sandy @ 4500 MHz
X5650 6-Core Westmere @ 3982 MHz
AMD FX 8320E Black Edition

FX-8320E @4.5GHz, X5650 @ 4.0GHz, X6 1045T @4.0GHz, i7 [email protected]
Thinkpad T420p with i7-2720QM overclocked because this is OCN

Last edited by Heuchler; 08-08-2019 at 03:18 PM.
Heuchler is offline  
Sponsored Links
Advertisement
 
post #12 of 118 (permalink) Old 08-06-2019, 07:06 PM - Thread Starter
New to Overclock.net
 
Heuchler's Avatar
 
Join Date: Mar 2012
Posts: 2,001
Rep: 273 (Unique: 192)
Quote: Originally Posted by Nighthog View Post
Just a hint to users of Ryzen Master.

That software OVERWRITES settings inside the CPU/AGESA section of BIOS. So settings set in Ryzen Master can at times not be reset with clear-cmos so be careful! I've seen other users needed to basically Q-flash their BIOS and have Ryzen Master completely nuked to get control back to BIOS.
Ryzen Master would otherwise keep "taking over" control and set values.
Suspected as much. Figured swapping the CPU with a different model ID string could clear the flag. Non-volatile register inside the Processor also came to mind.

Overclocking History (Click to show)
Intel 386DX/16 @ 20 MHz
CX486SLC/50 @ 50 MHz
AM486DX2/80 @ 100 MHz
AM486 DX4-100 @ 120 MHz
AK5x86-P75 [email protected] 160 MHz
Pentium 90 @ 120 Mhz
IBM 6x86L P166+ [email protected] 160 MHz
Celeron 300a @ 454 MHz
Pentium 3 700 @ 933 MHz
Athlon XP 1400+ @ 1600 MHz
Athlon XP 1800+ @ 2088 MHz
Athlon XP 2500+ @ 2200 MHz
Athlon 64 3000+ @ 2603 MHz
Athlon X2 BE2300 @ 1900 MHz
Athlon X2 4200+ @ 2210 MHz
Athlon X2 5000+ @ 2600 MHz
Core 2 Duo E4300 @ 3000 MHz
Core 2 Duo E6750 @ 3600 MHz
Core 2 Duo E8400 @ 4000 MHz
Xeon C2Q L5408 @ 3200 MHz
Xeon C2Q X5450 @ 3300 MHz
Xeon C2Q E5440 @ 3400 MHz
Xeon C2Q E5450 @ 3600 MHz
Phenom2 X4 B50 @ 3700 MHz
Phenom2 X6 1045T @ 4050 MHz
Core i5-2500K Sandy @ 4500 MHz
X5650 6-Core Westmere @ 3982 MHz
AMD FX 8320E Black Edition

FX-8320E @4.5GHz, X5650 @ 4.0GHz, X6 1045T @4.0GHz, i7 [email protected]
Thinkpad T420p with i7-2720QM overclocked because this is OCN
Heuchler is offline  
post #13 of 118 (permalink) Old 08-07-2019, 09:57 PM
New to Overclock.net
 
Join Date: Dec 2018
Location: USA
Posts: 29
Rep: 2 (Unique: 2)
Mem OC Results

3800x | x570 Master | DDR4 3800 cl16 w/IF 1900
Attached Thumbnails
Click image for larger version

Name:	Annotation 2019-08-07 215756.jpg
Views:	87
Size:	287.3 KB
ID:	287116  

Click image for larger version

Name:	Annotation 2019-08-07 215833.jpg
Views:	54
Size:	285.8 KB
ID:	287118  

Click image for larger version

Name:	Annotation 2019-08-07 215929.jpg
Views:	42
Size:	287.9 KB
ID:	287120  

Click image for larger version

Name:	Annotation 2019-08-07 215639.jpg
Views:	59
Size:	272.3 KB
ID:	287122  


On the bench now: x570 Master, 3800x, [email protected] 1:1, H115i, RM850x, RX5700 XT
Crosshair VII (WiFi), 2700X, F4-3200C14D-32GTZSW @3200, 960Pro, 860Evo, GTX1080ti, HX850, Celsius S36, Define R6
X470 Taichi, 2700X, F4-3200C14D-16GTZSK @3200, 960Evo, 860Evo, GTX1080, RM850x, Celsius S36, Define R6 usb-c
Maximus X Hero (WiFi AC), 8700K 5.1GHz, 32GB Dominator c16 @3200, 960Evo, 860Evo, GTX1080ti, HX1000i, H150, Obsidian 500D
Delta9k is offline  
Sponsored Links
Advertisement
 
post #14 of 118 (permalink) Old 08-08-2019, 01:27 PM
New to Overclock.net
 
Join Date: Aug 2019
Posts: 10
Rep: 0
Quote: Originally Posted by Delta9k View Post
3800x | x570 Master | DDR4 3800 cl16 w/IF 1900
but, is it cold boot stable? :S
Labuka is offline  
post #15 of 118 (permalink) Old 08-08-2019, 06:42 PM
New to Overclock.net
 
Join Date: Dec 2018
Location: USA
Posts: 29
Rep: 2 (Unique: 2)
Quote: Originally Posted by Labuka View Post
but, is it cold boot stable? :S
Indeed it is.
Attached Thumbnails
Click image for larger version

Name:	RamStabilityCheck.jpg
Views:	104
Size:	499.7 KB
ID:	287268  

Click image for larger version

Name:	x570Master3800x.jpg
Views:	94
Size:	610.7 KB
ID:	287270  


On the bench now: x570 Master, 3800x, [email protected] 1:1, H115i, RM850x, RX5700 XT
Crosshair VII (WiFi), 2700X, F4-3200C14D-32GTZSW @3200, 960Pro, 860Evo, GTX1080ti, HX850, Celsius S36, Define R6
X470 Taichi, 2700X, F4-3200C14D-16GTZSK @3200, 960Evo, 860Evo, GTX1080, RM850x, Celsius S36, Define R6 usb-c
Maximus X Hero (WiFi AC), 8700K 5.1GHz, 32GB Dominator c16 @3200, 960Evo, 860Evo, GTX1080ti, HX1000i, H150, Obsidian 500D
Delta9k is offline  
post #16 of 118 (permalink) Old 08-09-2019, 03:25 PM - Thread Starter
New to Overclock.net
 
Heuchler's Avatar
 
Join Date: Mar 2012
Posts: 2,001
Rep: 273 (Unique: 192)
[Puget Systems] Does RAM speed affect video editing performance?
https://www.pugetsystems.com/labs/ar...formance-1528/
Attached Thumbnails
Click image for larger version

Name:	PugetSytem Mem scaling - After Effects.jpg
Views:	25
Size:	100.5 KB
ID:	287488  

Click image for larger version

Name:	PugetSytem Mem scaling - NeatBench 5.jpg
Views:	16
Size:	89.2 KB
ID:	287490  

Click image for larger version

Name:	PugetSytem Mem scaling - Photoshop Benchmark.jpg
Views:	14
Size:	95.1 KB
ID:	287492  


Overclocking History (Click to show)
Intel 386DX/16 @ 20 MHz
CX486SLC/50 @ 50 MHz
AM486DX2/80 @ 100 MHz
AM486 DX4-100 @ 120 MHz
AK5x86-P75 [email protected] 160 MHz
Pentium 90 @ 120 Mhz
IBM 6x86L P166+ [email protected] 160 MHz
Celeron 300a @ 454 MHz
Pentium 3 700 @ 933 MHz
Athlon XP 1400+ @ 1600 MHz
Athlon XP 1800+ @ 2088 MHz
Athlon XP 2500+ @ 2200 MHz
Athlon 64 3000+ @ 2603 MHz
Athlon X2 BE2300 @ 1900 MHz
Athlon X2 4200+ @ 2210 MHz
Athlon X2 5000+ @ 2600 MHz
Core 2 Duo E4300 @ 3000 MHz
Core 2 Duo E6750 @ 3600 MHz
Core 2 Duo E8400 @ 4000 MHz
Xeon C2Q L5408 @ 3200 MHz
Xeon C2Q X5450 @ 3300 MHz
Xeon C2Q E5440 @ 3400 MHz
Xeon C2Q E5450 @ 3600 MHz
Phenom2 X4 B50 @ 3700 MHz
Phenom2 X6 1045T @ 4050 MHz
Core i5-2500K Sandy @ 4500 MHz
X5650 6-Core Westmere @ 3982 MHz
AMD FX 8320E Black Edition

FX-8320E @4.5GHz, X5650 @ 4.0GHz, X6 1045T @4.0GHz, i7 [email protected]
Thinkpad T420p with i7-2720QM overclocked because this is OCN
Heuchler is offline  
post #17 of 118 (permalink) Old 08-09-2019, 03:37 PM - Thread Starter
New to Overclock.net
 
Heuchler's Avatar
 
Join Date: Mar 2012
Posts: 2,001
Rep: 273 (Unique: 192)
[Tech Spot] 3rd-Gen Ryzen - Memory Scaling
https://www.techspot.com/review/1891...mance-scaling/

Spoiler!



Hardware Unboxed video:


Sub-timing tuning helps a lot on Ryzen 3000 vs XMP profile.
DDR4 3000 tuned ties or beats DDR4 3600 CL16 using XMP profile.

Ultra graphic preset isn't as relevant as Medium when looking at performance bottleneck.

Overclocking History (Click to show)
Intel 386DX/16 @ 20 MHz
CX486SLC/50 @ 50 MHz
AM486DX2/80 @ 100 MHz
AM486 DX4-100 @ 120 MHz
AK5x86-P75 [email protected] 160 MHz
Pentium 90 @ 120 Mhz
IBM 6x86L P166+ [email protected] 160 MHz
Celeron 300a @ 454 MHz
Pentium 3 700 @ 933 MHz
Athlon XP 1400+ @ 1600 MHz
Athlon XP 1800+ @ 2088 MHz
Athlon XP 2500+ @ 2200 MHz
Athlon 64 3000+ @ 2603 MHz
Athlon X2 BE2300 @ 1900 MHz
Athlon X2 4200+ @ 2210 MHz
Athlon X2 5000+ @ 2600 MHz
Core 2 Duo E4300 @ 3000 MHz
Core 2 Duo E6750 @ 3600 MHz
Core 2 Duo E8400 @ 4000 MHz
Xeon C2Q L5408 @ 3200 MHz
Xeon C2Q X5450 @ 3300 MHz
Xeon C2Q E5440 @ 3400 MHz
Xeon C2Q E5450 @ 3600 MHz
Phenom2 X4 B50 @ 3700 MHz
Phenom2 X6 1045T @ 4050 MHz
Core i5-2500K Sandy @ 4500 MHz
X5650 6-Core Westmere @ 3982 MHz
AMD FX 8320E Black Edition

FX-8320E @4.5GHz, X5650 @ 4.0GHz, X6 1045T @4.0GHz, i7 [email protected]
Thinkpad T420p with i7-2720QM overclocked because this is OCN
Heuchler is offline  
post #18 of 118 (permalink) Old 08-10-2019, 04:07 AM
New to Overclock.net
 
drmrlordx's Avatar
 
Join Date: Apr 2014
Posts: 1,360
Rep: 75 (Unique: 52)
@Heuchler

Thanks for creating this thread.

I've had difficulty overclocking RAM thanks to how annoying it is to change certain settings in the UEFI. In particular, VDDP and VDDG voltages. Changing vSoC voltage under the Settings menu is also a headache. I can change any of them using Ryzen Master, but I can't tweak them directly in the UEFI under Settings -> AMD Overclocking.

I have other problems, but that is my main one.

Watch this space for future . . . uh . . . stuff! Yeah. That.
drmrlordx is offline  
post #19 of 118 (permalink) Old 08-10-2019, 07:22 AM
New to Overclock.net
 
bigblueshock's Avatar
 
Join Date: Jun 2016
Posts: 46
Rep: 1 (Unique: 1)
Hi Guys. Just put my rig together on Thursday and finally had some time to play around. The benchmarks in the picture are from a 3900x on the X570 Master

My first attempt at overclocking *JUST* the RAM. Everything else is BIOS Defaults. I performed three different tests.

1) BIOS Stock Default (2133)
2) **XMP for my Memory 15-15-15-35 3600 (F4-3600C15D-16GTZ)
3) 1usmus "FAST V1" settings for 3600. (This would be labeled the "3600 C14 FAST" results) 2 Hours Memtest Stable from DRAM Calc Program

**Doesn't seem like XMP pulled the right timings, it seemed to have pulled 16-15-15-35 CR1 judging from the middle picture, no idea but I left it alone)

Picture attached. Sorry I'm not a picture editor, best I can do copying and pasting lol.

Edit: Is there a reason the "CPU Clock" goes down to 4300 MHz when overclocking RAM? Or is that just a reading glitch in Aida? It seems to be 4625 MHz when everything's stock.
Attached Thumbnails
Click image for larger version

Name:	BENCHMARKS.jpg
Views:	93
Size:	571.9 KB
ID:	287830  


Last edited by bigblueshock; 08-10-2019 at 07:32 AM.
bigblueshock is offline  
post #20 of 118 (permalink) Old 08-10-2019, 08:24 AM
New to Overclock.net
 
Apache14's Avatar
 
Join Date: May 2017
Posts: 10
Rep: 0
Quote: Originally Posted by bigblueshock View Post
Hi Guys. Just put my rig together on Thursday and finally had some time to play around. The benchmarks in the picture are from a 3900x on the X570 Master

My first attempt at overclocking *JUST* the RAM. Everything else is BIOS Defaults. I performed three different tests.

1) BIOS Stock Default (2133)
2) **XMP for my Memory 15-15-15-35 3600 (F4-3600C15D-16GTZ)
3) 1usmus "FAST V1" settings for 3600. (This would be labeled the "3600 C14 FAST" results) 2 Hours Memtest Stable from DRAM Calc Program

**Doesn't seem like XMP pulled the right timings, it seemed to have pulled 16-15-15-35 CR1 judging from the middle picture, no idea but I left it alone)

Picture attached. Sorry I'm not a picture editor, best I can do copying and pasting lol.

Edit: Is there a reason the "CPU Clock" goes down to 4300 MHz when overclocking RAM? Or is that just a reading glitch in Aida? It seems to be 4625 MHz when everything's stock.

Try drop your ram to 3400mhz, I have seen reports of poor boost behavior with 3600mhz or above.
Apache14 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off