Originally Posted by ManniX-ITA
I'm more inclined to go back to an Intel platform than to reformat my main install
When I read that article I post I found this.
Engaging PBO overrides the stock settings for these variables. The basic "enabled (PBO on)" preset enables significantly higher PPT/TDC/EDC limits, but doesn't change two important settings: PBO Scalar or Clock.
PBO Scalar overrides the AMD default health management settings and allows increased voltage at the maximum boost frequency and lengthens boosting duration. Changing the PBO Scalar setting unlocks the best auto-overclocking performance, so the basic preset can be lacking.
You can also use the "PBO Advanced" profile that defines the limits of each motherboard based on the capabilities of the power delivery subsystem (as defined by the motherboard vendor).
So to get the max out of the CPU is to enable PBO in bios or PBO advanced. I am using the vendor settings and higher up the limits.
The difference between USB drive and hard drive maybe are only failed reads in the software? As article mention it seams the best software to calc power consumption is HWinfo.
Default for Socket AM4 is at least 142W on motherboards rated for 105W TDP processors
So this should be able to reach.
Skickat från min SM-G973F via Tapatalk