and or to anyone that can help, thank you in advance.
RAM INFO: GSKILL TRIDENT Z ROYAL RAM - Hynix CJR 3600 Mhz 1.35v 2x8GB
Motherboard: X470 AORUS GAMING 7 WIFI (rev. 1.1) with F8 BIOS - latest as of now
Processor: Ryzen 7 2700x
I used the calculator version 1.4.1 and I can boot using the 3600 speed SAFE calculation, however, I am always getting BSODs/system crashes randomly so I decided to back down.
What I did is to use the FAST calculation 3000 Mhz because any higher than that when you choose to turn off the Geardown mode it won't work. So if I want higher than 3000 RAM speed I am stuck with SAFE calculation which suggests Geardown mode enabled. Now I am at 3000 Mhz as the FAST calculation from the calculator all default, Powerdown mode, Geardown mode and BankGroupSwap all disabled and so far stable no BSODs/crashes. When it comes to voltage, I just followed the recommended volatage for the VCORE SOC and DRAM Voltage.
Hope you can give me guys any suggestions of what to do, I just don't have much knowledge of tinkering the RAM values or what to check/adjust to make it stable at 3600 Mhz.
I am good if at least we can make it work stable 3200 Mhz FAST/tight timings or if it is still possible at 3600 using SAFE or FAST calculation just with no crashes/BSODs. If you want screenshots or any additional info you need that can help, I'll reply as soon as I can.