Originally Posted by CJMitsuki
@ 1:1:1? Bc im not sure if you are aware but unless you specify in the bios above 3600 the FCLK, UCLK, and MEMCLK detach and stop running at the same frequehats what makes the much higher frequencies possible such as 4000+. This drops performance a bit so you have to make sure ypu are going high enough frequency to negate that performance loss. But you can lock them in the bios. There is an option (forget the name) that has the choices something like “UCLK==MEMCLK” and “UCLK==MEMCLK/2”. The first ine is the one you want to go with and also on the Main page where CPU and SoC voltage is there should be a FCLK freq drop down. For 3600 MEMCLK the corresponding FCLK will be 1800mhz, and 4000 MEMCLK will be 2000mhz FCLK, etc.
You had time before work to finish testing of that tight 3733 ??
I came up with interesting settings to test. Latency seems low for CL16 63.7- 63.8ns and very nice numbers all around
Only had time for 450% pass on ramtest
3800cl16/16/16/32/52 1.45v(volts deffo can be lower but not had time today yet)
RDRD SCL 3
WRWR SCL 3
WRWR SC 1
WRWR SD 8
WRWR DD 8
From what I'w run on Cinebench trilogy its bit faster than 3733cl14 BUT requires less volts in general. So I think this could be nice profile for people with no fans over ram kits. Been running tests till 3am again. Them new toys are killing us of man
I'w cut sleep down to like 4-5 hours since gotten 3900x cause cant sleep if not stable You know that feel
Last edited by lordzed83; 07-17-2019 at 04:05 AM.