RTX 2080TI FTW3 ULTRA and Hydrocopper block - Overclock.net - An Overclocking Community

Forum Jump: 

RTX 2080TI FTW3 ULTRA and Hydrocopper block

 
Thread Tools
post #1 of 6 (permalink) Old 06-15-2019, 04:59 PM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
RTX 2080TI FTW3 ULTRA and Hydrocopper block

So I have a RTX 2080 Ti FT3 Ultra, about 5 months old now. I bought a water block and never got around to installing it because I had to RMA one of these. The screws were on waaay too tight and were poor quality. So, they were going to strip before I got it off. Called EVGA n they wanted me to RMA it. and they sent me this in return, also my case I intended to use this card with didn't fit this thing with a waterblock. Or really at all. bad QC on the case. so I kept the aircooler on n put it on my other rig. cuz my old gpu worked fine in the case.
accessories box is barely opened to confirm what it was so all the cables n such are there

out of the box it does 1980mhz or so, there are some games it gets picky with and needs +15mv. But! this is also with me running tons of things in the background and everything at max settings and an iffy overclock on my cpu. never crashes after that. Has a few hundred hours of gaming on it, no sweat. there is some dust, but thats unavoidable as I live in AZ and I have a special vaccuum and will clean it up before I ship.

I tried overclocking it again and have not had luck with overclocking this card till recently. I think my windows build was messing with alot of things. JUST got +500mhz mem to pass a benchmark (port royal and TSE), but core +103 with +33mv and +124% power limit Time Spy Extreme

waterblock is in open box (like new) condition.
the pic isnt well lit so you can't see it but the 2slot adapter is on the box.
also have red accents for air cooler
890days left on warranty as of 6-15-19 If anything happens I am reachable here and will give addll contact info for RMA with original owner
$1200 shipped with no waterblock
$1310 Shipped in US48 with USPS for less than listed price(not flat rate, big box with alot of bubble wrap n foam), fedex or UPS if you don't try n negotiate price
Attached Thumbnails
Click image for larger version

Name:	102c 33v 124pwr 33mem  TSEpass.png
Views:	32
Size:	3.22 MB
ID:	274630  

Click image for larger version

Name:	8l-wPhpe.jpeg
Views:	18
Size:	1.38 MB
ID:	274640  

Click image for larger version

Name:	K0WbYCwj.jpeg
Views:	20
Size:	1.25 MB
ID:	274642  

Click image for larger version

Name:	QlV-vxNf.jpeg
Views:	22
Size:	1.56 MB
ID:	274644  

Click image for larger version

Name:	sTdWq6Or.jpeg
Views:	17
Size:	582.4 KB
ID:	274646  

Click image for larger version

Name:	uDGE2gI5.jpeg
Views:	16
Size:	1.21 MB
ID:	274648  

Click image for larger version

Name:	V9d3ra55.jpeg
Views:	14
Size:	1.87 MB
ID:	274650  

Click image for larger version

Name:	wnhYrpk8.jpeg
Views:	12
Size:	1.49 MB
ID:	274652  

Click image for larger version

Name:	mQc-nang.jpeg
Views:	8
Size:	1.16 MB
ID:	274658  

Click image for larger version

Name:	8618 PR 503 mem.png
Views:	12
Size:	1.79 MB
ID:	274666  

Click image for larger version

Name:	TSE 6367 mem 501 core0 67v power 124.jpg
Views:	15
Size:	601.0 KB
ID:	274670  


(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?

Last edited by tatmMRKIV; 06-24-2019 at 01:36 PM.
tatmMRKIV is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 06-19-2019, 07:20 AM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
50 price drop$

and some new results. this is the ultra variant so this is about 2115mhz core
Attached Thumbnails
Click image for larger version

Name:	94c 51v 124pwr 474mem  TSEpass.png
Views:	18
Size:	1.40 MB
ID:	275136  

Click image for larger version

Name:	pr 9221 core 94 v 51 pwr124 mem 474.jpg
Views:	12
Size:	630.3 KB
ID:	275138  


(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?

Last edited by tatmMRKIV; 06-23-2019 at 08:31 PM.
tatmMRKIV is offline  
post #3 of 6 (permalink) Old 06-24-2019, 01:36 PM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
price drop

(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?
tatmMRKIV is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 06-26-2019, 08:06 PM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
out of town from 6/27-7/1
open to offers

(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?

Last edited by tatmMRKIV; 06-26-2019 at 11:04 PM.
tatmMRKIV is offline  
post #5 of 6 (permalink) Old 07-02-2019, 05:06 PM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
Price dropped to 1100shipped without block 1200 shipped with

(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?
tatmMRKIV is offline  
post #6 of 6 (permalink) Old 07-15-2019, 07:53 AM - Thread Starter
New to Overclock.net
 
tatmMRKIV's Avatar
 
Join Date: Dec 2012
Posts: 4,943
Rep: 122 (Unique: 84)
sold

(If y'all) ain’t ready for the old murder, then what you gonna do with the new me?
tatmMRKIV is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off