Curious if owners of this case can answer something for me: will a MCR320-QP Res R2 fit in the front of this case (turned either way) (from tip to tip it's 16.5" / 418mm)? Have one on hand I was hoping to use again. Thanks! http://www.swiftech.com/MCRX20-QP-RADIATOR-SERIES.aspx
I am planning on getting one of the XP versions of this rad, with this case whenever it comes to amazon. Also going to be using my h220 up top, hopefully mount my single 120 in the bottom as well.
Also considering the XSPC AX360, as well as possibly the Alphacool UT-60 360mm. Will only be either push or pull. Any recommendations? The Swiftech seems to perform very close to the UT60, and it much cheaper and thinner, so I was just going to go with that. Haven't read anything solid yet on the XSPC AX360 but it does look very nice with the removable core.
Would you guys recommend the barbs be up top or bottom on the 360mm rad? If they are on the bottom, I considered having my 7970 heatkiller loop exit to the bottom of the 360, then the exit of the 360 from a 90 to the cpu. CPU outflow to the h220, h220 outflow to the 7970.
@newone757 how do you get fresh air to the PSU? I know it has a little gap between the case and PSU but its not fresh air.
My case is elevated off of the desk. With some of my sons mega-blocks for now. Ill likely grab some feet with a sticky side and slap em on but in the meantime this works and you cant see them, just kind of floats