Yes it can be removed, but note that the removal is destructive. That means once it is off, you cannot put it back. It is pressed-on metallic film on the glass panel, you can take any single edge blade and scrape it off and it will NOT damage the glass. I just picked up this case for my new build (still in the planning stage) and the first two things I did was to move the De8auer plate to the back of the case, where I will never see it and to remove the ROG logo.
Note, the plate can be removed by heating with a handheld hair dryer to warm the adhesive and then taking a small wood wedge or plastic spatula and slowly prying the plate off after the adhesive is softened.
I suppose if you are very slow with the razor you could possibly remove the logo intact. But be aware the are separate press-on letters & images that make up the entire logo. I did not want to 'save' the logo so mine came up in pieces. Afterwards a simple cleaning with some glass cleaner and you would never have known that there was something stuck on that corner of the glass.
Last edited by WheresWally; 02-23-2020 at 04:04 PM.