New to Overclock.net
Join Date: Feb 2015
Location: Jacksonville, FL
I need help in choosing a case...
Long long ago I had wanted to do an all white pc build. Back when the Asus Mark S White camo mobo was out, I had the i7 4790k, the avexir white camo ram, the Galax gtx 970 HOG edition... and I wanted to put this in a TJ07 silver stone. I still have my white mobo, white graphics card, I still have the avexir ram too which is discontinued;( and my Galax gtx 970 HOF.
Now I had the silver silver stone TJ07 but it was the windowless one and someone ended up taking it. It was still in the box so I bet they thought I had a whole pc system in there and I got it pretty cheap. But before that happened I had purchased a custom waterblock for my graphics card, 2 “brass” but they look like gold Reservoirs. I also have two switftech MCP650 pumps with the gold bitspower covers on them. Also some hardline fittings and hardline tubing. This stuff has been sitting for 5 years unfortunately. Until last night of course.. I found my box with various ram and my dreams of my custom water cooled pc all in this box. Two bitspower Reservoirs with the brass tops and botttoms, the two swiftech MCP655-B. My hardline tubing, my fittings (which I know I’ll need more), the custom backplate and water block for the Galax HOF exition gtx 970... and I spent a decent amount of money on these products. From the processor to the ram, mobo, psu, oh and the two white XSPC radiators with all the led fans.. 120mm fans and I know one rad took 4 120mm fans and the other took 3. I have enough fans for a push/pull configuration for each rad but spacing will be a problem unless I mount this thing on a wall... lol. I’m so lost at what to do. I can post pictures of everything I have just to give an idea of the parts I’m working with. Since the TJ07 was stolen (which I was really upset about as I ordered some special parts from a site that covered all those front bay plates and a kid plate as well... but what case could I possibly use now? I’m not going to scrap the idea of putting my beautiful Asus mobo, avexir ram, and HOF gpu away. But I don’t have a waterblock for the cpu either. It amazes me how my ddr3 ram still allows me to play Assassins creed odyssey and Ghost Recon Wild lands with no problems! Any help would be greatly appreciated... the motherboard for those who don’t know is an ATX. The PSU if fully modular and I had even sleeved wires using mpc x’s colored sleeving and lutr0’s tools! I was going for a blue, white, and gold theme. But there’s so much out there now.. The 3 things I’m lacking is thermal pads for my gpu waterblock, a cpu waterblock, and a case... any help would be greatly appreciated!!! Thank you so much and it feels good to be back!