Death Bomb Finished.
I finished up the last few things on this build. I did a similar thing on my Corsair 550D, the open top when running a radiator up top looked unfinished, so I cut the top panel to allow just the rad area to be open and then glued a screen in the opening.
Here's the same treatment on the Nano S top panel.
Here it is open. Just looks unfinished and hot air coming up the right side gets sucked right back into the rad.
Here it is after I cut the hole and added the screen. There's a small neo magnet on the left rear corner, and the front two tabs are still in place to hold the front down. All the other tabs had to be removed.
A pic showing the new rivet locations where I had to move the internal divider plate over about 1/2" to accommodate the GTS 280 front radiator. Dust filter still in place.
I can also fit a 240 filter in the top now, under the modified top panel.
This unassuming little mITX rig is currently in 9th place globally in Fire Strike Ultra for single card (my name on the leader board is Simpleton, my user name here brought up some strange results, only some of them were mine)
And would be in 2nd place single card in Unigine Heaven (only beat by a 6950X rig) here if the leader board was ever updated.
I posted some pics of the build/internals in This Post
I really like the build, this is my third Fractal Design case and all of them have just turned out great.