Overclock.net - An Overclocking Community - View Single Post - H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)
View Single Post
post #200 of (permalink) Old 01-13-2012, 01:38 AM
PR-Imagery
Ever Forward.
 
PR-Imagery's Avatar
 
Join Date: May 2011
Location: Headed to the top.
Posts: 6,505
Rep: 231 (Unique: 166)
I was certain the H80 would not fit in the Thermaltake Armor+ (VH6001) but I can confirm it does indeed fit; just with one fan pushing or pulling. It's tight but the rad fits fairly comfortably.

450

without modifications, the case can only do one fan on any of the H series coolers, to do a push/pull, the psu support beam will need to be shaved to make room for the rad

450

450

Update: Mounting fan externally on the back of the case just requires placing a couple washers(depending on the thickness, I needed three of the washers that came with the H80 which is a little thicker than your standard key) between the fan and the case to keep the fan blades from touching when used in the a pull configuration.

450

450

"The greatest good you can do for another is not just to share your riches but to reveal to him his own."


PR-Imagery is offline