[Build Log] A Classy Cruncher
- Silverstone TJ07 ✔
- Asus Rampage III Black Edition ✔
- Intel Xeon X5680 ✔
- (3) 4GB Corsair Dominator GT 2000/CL9/1.65V ✔
- Lepa G-1600W ✔
- Enermax 600W Platimax ✔
- (4) Asus ROG 7970 Matrix ✔
- Corsair Performance Pro 128GB SSD ✔
- EK-Supremacy Clean CSQ Nickel Acetal ✔
- EK-FB RE3 Black Nickel Acetal ✔
- EK-RAM Monarch X6 Nickel Acetal ✔
- (4) EK-FC R9-280X Matrix ✔
- EK-FC Terminal Quad Semi Parallel ✔
- EK-D5 X-Top Acetal ✔
- Alphacool XT45 480mm Radiator ✔
- EK Black Nickel Fittings ✔
- EK-ZMT 3/8" ID 5/8" OD ✔
- Undecided Fan Controller
- Fans in the works ✔
- Koolance QDCs ✔
Table Of Contents:
Here's what I've got so far!
First to go was these pesky things.
Here's how it was looking, although on a shelf instead of the desk
Those Seidon rads fit nicely in the TJ07 top mesh area :)
(2x 120rads, not a 240)
Mounted in the case
Floating like magic!
Turns out the other side had to go as well :/
Still not quite sliding all the way in...
Ended up turning the rad around so I could fit the tray all the way in and keep the 92mm fans
Dat TJ07 man mmm
Go big or go home!
And the current state.
I may turn the other rad around as well to match a bit more, because matching = classiness amirite?
Yes you may be thinking, why are you going with AIO units when you're watercooling and work for EK. The reason is these CPUs don't get hot...even while mining. The TJ07 is pretty limited in terms of radiator mounting unless you do a lot of modifications, which I don't really want to do for this build. The Seidon's fit up top nicely and will cool each CPU with ease. The GPUs will have the real water cooling :)
DOGEEEEEEEEEE TO THE MOON!
For reals though. Saw a 15%+ spike today. I keep setting X amounts of Doge to sell for Y about of BTC and putting Doge at 5-10 points higher than current market and it's sold in less than an hour every time. Most Doge peeps are hoping to see a real nice spike at some point in the Olympics.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|