3770k vs 6700k In Fallout 4, Arma 3, Rainbow Six Siege. With core\cache\memory scaling ddr3-1600c11-2133c9 ddr4-2133c15-3000c12-4000c17 - Overclock.net - An Overclocking Community

Forum Jump: 

3770k vs 6700k In Fallout 4, Arma 3, Rainbow Six Siege. With core\cache\memory scaling ddr3-1600c11-2133c9 ddr4-2133c15-3000c12-4000c17

Reply
 
Thread Tools
post #1 of 37 (permalink) Old 09-13-2016, 02:56 PM - Thread Starter
New to Overclock.net
 
Join Date: May 2014
Location: Australia Northern VIC
Posts: 287
Rep: 20 (Unique: 19)
Test System
3770k -- 6700k
Asus Maximus V Gene Z77-- Asus Maximus VIII Gene Z170
Samsung DDR3-1600c11 2x4GB 1.35v dual sided -- G.Skill DDR4-3200c14 2x8GB single sided
EVGA GTX1070 SC (OC=+75 core +750 mem +112 powertune use on all tests)
64g Samsung 830, 1tb Sandisk ultra II, 3tb WD green
Seasonic XP 1050 < tad overkill for the current system which has topped out at 306w from the wall
Silverstone TJ08-EW
Swiftech Apogee drive II
200mm Phobya rad + Silverstone Air Penetrator AP181
EK VGA Supreme HF
Win10




Average fps in fallout 4 are not perfectly accurate im afraid due to it being a short run with low fps at the start and high fps at the end if i was a second out starting\stopping the test it could throw the results a bit but the minimum seem very consistent



For arma 3 i used a stratis time demo average fps are nice and consistent but the minimum were very random so i left them out



R6 your typical gpu bottlnecked game most ram reviews use here you can see the 3770k at stock with the gtx1070 oc is faster than the 6700k oc with stock gtx1070
R6 had the gpu pegged at 100% load while arma stayed well under being cpu bottlnecked


lightroom also sees over 20% improvement from higher ram speeds when exporting but only ~10% when rendering previews

time taken to export 150 24mp .nef to jpeg
2133c15 3:20
3200c14 2:50
3866c16 2:39

time taken to build 150 24mp 1:1 previews
2133c15 6:03
3200c14 5:33
3866c16 5:23

XTU, AIDA64, Timings

DDR3
[email protected] 2133c9 1.5v


DDR4
[email protected] SPD-2133c15 Single channel

[email protected] SPD-2133c15

[email protected] core 4.2GHz cache SPD-2133c15

[email protected] core 4.7GHz cache SPD-2133c15

[email protected] 3866c16 t1 1.4v

[email protected] core 4.7GHz cache XMP-3200c14

[email protected] core 4.7GHz cache 3000c12 t1 1.42v (unstable)

[email protected] core 4.7GHz cache 3866c16 t1 1.4v

[email protected] core 4.7GHz cache 4000c17 t2 1.4v
Dasa is offline  
Sponsored Links
Advertisement
 
post #2 of 37 (permalink) Old 09-13-2016, 04:20 PM
New to Overclock.net
 
TheReciever's Avatar
 
Join Date: Nov 2009
Posts: 11,316
Rep: 434 (Unique: 322)
Thanks for sharing.

Gives me an idea of what to look forward to if/when I upgrade to the i7 3770k, though I still do quite ok with the 2500k @ 4.8Ghz

Biased rPGA and MXM 3.0A/B Elitest.
TheReciever is offline  
post #3 of 37 (permalink) Old 09-14-2016, 08:11 AM
Mice is bad civilization
 
Melan's Avatar
 
Join Date: Feb 2015
Location: 0,0
Posts: 3,161
Rep: 108 (Unique: 82)
Good to know. I'm still using 3770K at 4.5ghz for now, waiting for zen to show what it can do before retiring old gear. Skylake was kind of attracting my attention but it's too late to upgrade now imo.
Melan is online now  
Sponsored Links
Advertisement
 
post #4 of 37 (permalink) Old 09-14-2016, 08:40 AM
Linux Lobbyist
 
Cakewalk_S's Avatar
 
Join Date: Mar 2011
Location: Magic Kingdom, WDW
Posts: 6,659
Rep: 276 (Unique: 256)
I thought all this time my 4.5ghz 2500k would last me another 2 years till I started doing more and more research into sky lake and the 6700k...now I really believe that the upgrade was worth it. Incredible performance and I'm Killin it in even single core performance over a 2500k @ 4.5ghz...


Cakewalk_S is offline  
post #5 of 37 (permalink) Old 09-16-2016, 04:05 PM - Thread Starter
New to Overclock.net
 
Join Date: May 2014
Location: Australia Northern VIC
Posts: 287
Rep: 20 (Unique: 19)
saved a bit of other data with afterburner when runing these tests not sure if any of it is of interest
for example this is a run through fallout 4 on the 3770k
Dasa is offline  
post #6 of 37 (permalink) Old 11-19-2016, 01:20 PM
New to Overclock.net
 
rired48's Avatar
 
Join Date: Nov 2008
Location: USA / RI
Posts: 6
Rep: 0
I just finished a new Mini-ITX form factor build in one of the smallest, coolest looking cases I've ever had... the aluminum, Lian-Li made Ncase M1 v5.

Components:
Asus Z170i Pro Gaming MB
i7-6700k
Noctua C14 HSF
nVidia 1080-FE
Corsair Vengeance LPX DDR4-3200 (2x8GB)... problem...
1TB SSD
Corsair SF600 PS
2 Vardar 120mm fans exhausting out on side panel
M-Audio AV40 (2.0, powered) speakers
Seenheiser PC360 headset

I can only get one stick of the above memory to run, so I'm running single-channel now, unfortunately. I also have 2 sticks of Corsair -3000Hz I will try. I'm thinking I have to raise the voltage just a bit. If that's not it, then that memory slot could be bad or that memory stick. It's amazing how fast this rig is in Battlefield 1, even with single-channel memory.

It was a difficult build for me... extremely tight quarters for everything to fit.

Any thoughts on the memory situation?

"The truth is rarely pure and never simple." Oscar Wilde


Ncase M1 v5 | Asus Z170i Pro Gaming | i7-6700k | Noctua C14 HSF | nVidia 1080-FE | Corsair DDR4-3200 | Corsair SF600 | M-Audio AV40 speakers (2.0) | Sennheiser PC360 headset

rired48 is offline  
post #7 of 37 (permalink) Old 01-18-2017, 06:03 AM
New to Overclock.net
 
Xuper's Avatar
 
Join Date: Jan 2014
Location: None
Posts: 789
Rep: 43 (Unique: 29)

so according to Test , best Spot is DDR4 3000 with Cl 12 but unstable.So DDR4 3400 CL 14?


CPU : AMD Ryzen 1600X | Memory : [Ripjaws V] F4-3200C16D-16GVKB  | Motherboard : Asus Prime X370 Pro | Graphic : XFX AMD Radeon R9 290 Double Dissipation | Monitor : AOC 931Sw | HDD : 1x120 GB SSD Samsung Evo , 1x2TB Seagate

 

 

Xuper is offline  
post #8 of 37 (permalink) Old 01-18-2017, 06:27 AM
New to Overclock.net
 
hanzy's Avatar
 
Join Date: Nov 2013
Posts: 749
Rep: 19 (Unique: 17)
Thanks for taking the time to do this.
I was /am on the fence upgrading my 4770k which is stuck at 4.2 stable to a 7700k.
My MSI M Power Max Z87 board is starting to get a little flaky, but it is still usable.
Most reviews were only showing a ~2-10 FPS gain. I had a feeling with high clocks and some fast DDR4 the gain could be much more.
Zen, Vega, 1080Ti are so close though I may as well wait a few more months. I got money burning a hole in my pocket right now though!

“Go then, there are other worlds than these.”

“Every gun makes its own tune... Alive or dead, it's your choice.”

Vin: We deal in lead, friend.
Calvera: So do I. We're in the same business.
Vin: Only as competitors.
hanzy is offline  
post #9 of 37 (permalink) Old 01-19-2017, 03:41 PM - Thread Starter
New to Overclock.net
 
Join Date: May 2014
Location: Australia Northern VIC
Posts: 287
Rep: 20 (Unique: 19)
Quote:
Originally Posted by Xuper View Post

so according to Test , best Spot is DDR4 3000 with Cl 12 but unstable.So DDR4 3400 CL 14?
whats the best spot to you?
for me its whatever gives the highest stable speed in the end and after extended testing it was 3866 16-16-16 2t 1.425v
the sweat spot is likely to change from one ram kit to the next as some may handle higher frequencies better than lower latency and vise versa
Dasa is offline  
post #10 of 37 (permalink) Old 02-04-2017, 02:11 AM
New to Overclock.net
 
Mikeg1's Avatar
 
Join Date: Feb 2017
Posts: 13
Rep: 0
Trying to match or exceed you lol Arma is life. What version Aida are you using ?

Mikeg1 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off