Something gone wrong. Two days after the fill decided to power up the rig. Pressed the power button an nothing, checked the psu, the switch is on but it just does not start. Drained the system, disassemble it all, checked all the cables, reassembled it on the “bench” still nothing, jump started the psu, all the voltages are correct. All it does is flashes the rgb’s at the bottom of the motherboard and an orange light next to pci-e slot lights up.
Next day found someone with z370 board and checked all the gear. The mobo is DEAD!!!!
It is currently on the way to the seller and hopefully I’ll get a replacement.
Meanwhile i decided to make my own waterway (distribution) board
Detting all the tubes alligned
Almost the final design in autocad.
It is going to be a three piece board. 8mm acrilyc sandwiched between 2 5mm sheets. All is going to be held together with m4 hex bolts. And lit up with an rgb strip at the back
Looks like it becomes a never ending build