December Project - unnamed - Page 4 - Overclock.net - An Overclocking Community

Forum Jump: 

December Project - unnamed

Reply
 
Thread Tools
post #31 of 41 (permalink) Old 03-11-2019, 12:11 PM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
I know its been over 1 month since last post and the thread have been dead silent, I have been really busy with "real life" and ideas evolve over time and changes the original plan a little

Oh, and I've started playing a "new" game - Sea of Thieves, that takes a load of time too

So, what I wanted to update you on is, I have painted the new toppanel like 7 times, 2 black layers and 5 blue, with a little sanding in between for total smoothness, takes a really really long time too
My radiator is only 240mm for the CPU, so looked bonkers having a 3x120 space in the top panel on the 800D cabinet, im sorting it by remaking the top, it will be all worth it, just wait.


Sneak peak:




I'll Be Back.....

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
Sponsored Links
Advertisement
 
post #32 of 41 (permalink) Old 03-18-2019, 11:31 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
Came to think about during test-fitting of CPU loop that its almost impossible to fill liquid in that loop...
  • I can't unmount CPU block because of the way the GPU radiator is mounted.
  • I can not mount the CPU radiator full of liquid, because I cant measure the CPU tubes correctly before the CPU radiator is placed where it should be.
  • I don't want to mount and unmount everything more than I have to.
  • I want to mount the CPU rad so its res is facing towards the front, the res is an eyesore and the CPU tubes will be shortest this was for maximum pressure on the CPU
There is standard G 1/4 in the res on CPU rad, but its placed almost all up against the front, right above the DVD drive.
Im thinking of making a fillport somewhere with some standard water cooling parts...



It just got even more complex and expensive... Let me remind you, I still don't know if the hardware is actually alive (its dang old, and I forgot to test it before I exploded it all to pieces and am trying to make it into a full build again), also I don't really need this PC, its just a hobby when I await some other newer tasks to hit me


Come back later for more............

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #33 of 41 (permalink) Old 03-18-2019, 11:43 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
Came to think about, I have not shared the latest pictures other than on my Instagram (I'm @_at0mac_), sorry

There was the day I cleaned fans and soldered a broken one



And there was a day I mounted the top panel and test fittet the CPU rad with fans on




The new flat top in metallic blue and chrome air filter looks soo mmmmmmmmmmmmmmmmmmmm imo. Most likely you have never seen a Corsair 800D like this before

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
Sponsored Links
Advertisement
 
post #34 of 41 (permalink) Old 03-18-2019, 12:01 PM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
Hehe another thought, did you know this thread is on 4 different pages at the same time?
I can almost fit all 4 in a reasonable resolution on my 32" monitor at the same time.



Tweak.dk

Overclock.net

LinusTechTips

Bit-tech.net

Daily I converse and write in both English and Danish, so why not share the tech enthusiasm <3

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #35 of 41 (permalink) Old 03-18-2019, 01:26 PM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
Solution for the filling issue? - use more hose!

But need some fittings to do so, these look a lot like im going to do plumbing on some kind of house issue with the design/colors these have



Am now waiting for a package before I can continue...


C'ya later...…..

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #36 of 41 (permalink) Old 04-03-2019, 11:25 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
Sorry but I been a little silent again, for those who follow me on Instagram you know I lately have been struggling with a eye injury, and today I remembered that I totally forgot to update!
So here goes, mega update:

Have drilled the holes bigger in rad, so I can use M4 screws instead of the funky size Swiftech originally used, I even wonder where the original screws are, well never mind....



Mounted the first fans and fill port adapter, true gold digger



When this was done, I realized there is actually not enough space for it all, the fill port adapter is hitting the end of the DVD drive. So what to do, lets mod it! Problems arise, the drive is build like a tank and dont want to come apart, so I have to mod it with whatever tool possible and ended out with a not so great hole, but whatever, will not be seen in the end result.







Fill port finally installed!



Reinstalled the cooling tubes for the CPU AIO, but now much much shorter (the black tubes)





At this point, there are so so many details in this build, its a huge task both in term of work and in size.








No doubt about this PC is heavily car themed, here a picture of the front, top and backside as it looks now:





Next step is to deal with a lot of wires, there are SO many!
Also need to install the light, finish building the psu shroud and mount all the last stickers.
Actually, if all end out working I have a new investment in mind for something really cool to add, but will only do it if everything pans out so maybe you will see it in a later update.


Continues at a later time...

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #37 of 41 (permalink) Old 04-03-2019, 11:43 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
To give an idea about why there is so many tubes in the system - there is 3 individual loops!!



Red - CPU AIO, the unmarked one right under rad it the fillport, yes a AIO with a fillport. Technically not a part of the loop and therefor unmarked.

Green - one of the graphics cards I got for free, came with an EKWB waterblock attached, so have to watercool it.

Blue - chipset, because Gigabyte back in the day decided this board should be able to be watercooled, so lets do it 10 years too late

A true old school system where looks is not nearly as important as todays builds


...C' ya

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #38 of 41 (permalink) Old 04-09-2019, 03:56 PM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
A status update of where im at now, the mod is actually DONE now - but the first time I turn it on, something starts smelling bad...
I suspect that the GPU I originally got for free is actually broken and I think it has somehow broken the motherboard too, as it is now it dont boot and just keeps turning on and off.
And yes I have tried 2 different CPUs and other RAM, no luck.

To be honest, I dont trust my chinese psu extensions, I might think they have broken the PSU as well, the PSU is afterall about 10 years old so the slightest little thing and it will not work.

I have to get all parts out of the case and test one by one.

In the end maybe I need to replace:
  • Motherboard
  • One GPU (or dont run with Crossfire)
  • Powersupply
  • Extensions

I'll return when I know what to do from here on out.
(I have build PCs for more than 20 year, but I have never build anything this old, so I should for sure have tested it before putting it inside the case, but I trust hardware too much)

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #39 of 41 (permalink) Old 04-25-2019, 11:54 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
AWESOME UPDATE!!!

Today I got a little time to transfer the most basic parts of the build to my "test rig", with a totally standard aircooler on top of the CPU.



Pushed the button and o... m... g...



It's freaking ALIVE! (said in Frankensteins voice)



This is with the little 920 CPU, need to check if everything is A-ok before I install one of the much beefier Xeons.
Need to check RAM, if GPU performs as expected or bugs out and just a general inspection before reinstalling it into the modded case.

Also just remembered that my HTPC have an AM1 based ITX board with a PCIe 16X slot on, so I can install that in the modded case with the watercooled GPU, just to see if that GPU actually survived the mishap I had with the motherboard.

I expect to get some little time in the weekend for more trouble shooting, but at least this was a very nice surprise on an else kind of boring Thursday.


Stay tuned!

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
post #40 of 41 (permalink) Old 05-14-2019, 12:34 AM - Thread Starter
~PC ninja~
 
AT0MAC's Avatar
 
Join Date: Jun 2013
Location: Denmark
Posts: 398
Rep: 2 (Unique: 2)
It has taken way longer than I estimated to bug test the rig, but it looks like I can move forward again.
It turned out it would not boote from either USB or SSD as it was, no matter what I did - and I did a lot!

Kind of frustrating, but yesterday I got an idea, maybe it would boot from CD...
So I made an ISO into a disc, only God know when I last did that.



Success!!
I now have a pretty slow Windows 10 installed!

Next up is finetuning and making it an actual usable machine.

Its far from over yet &#x1f609;



&#x1f642;

My Gaming PC: Killer Panda Z390

Follow my December build: Unnamed
CPU
8600K
Motherboard
Asus Maximus X Code Z370
GPU
Zotac Amp Extreme GTX 1070
RAM
Corsair Dominator Platinum DDR4 2400CL10
Hard Drive
Toshiba DT01ACA050
Hard Drive
Western Digital Black 2,5"
Hard Drive
Intel 520 series SSD
Hard Drive
Corsair Force MP500
Power Supply
EVGA G2
Cooling
Custom loop of highest end components
Case
Lian Li PC-V33 highly modded
Operating System
Windows 10 Pro highly tweaked with gaming in mind
Monitor
LG 32GK850G
Keyboard
Logitech G 413 Silver
Mouse
Asus ROG Gladius II Origin
Mousepad
Asus ROG Scabbard
▲ hide details ▲
AT0MAC is offline  
Reply

Tags
Gigabyte , Intel , Overclock , watercool , x58

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off