Originally Posted by arb65912
Hello again gentlemen,
It is done, bought the parts........
Now I can relax and think about cooling.
I decided on Closed Loop water Cooling, the reason. I do not mind maintenance and work BUT, I do not like having to deal with liquids close to my build.
I understand it is safe if you follow guidelines but I will skip it that time....
Please give me some suggestions, I have found that one.
Fractal Design Celsius S36 360mm Silent High Performance Slim Expandable All-In-One CPU Liquid / Water Cooler
Thank you again for ALL feedback. I love these forums.
My suggestion is to stay away from CLCs. Either you go full custom loop, or you go full air.
The big reasons against CLCs are these. They have an expiration date. They're only slightly better in some occasions than air cooling. They're costly, with most liquid cooling disadvantages and most of the times they're not better than air cooling.
General guidlines. If go for air cooling, not having the right case and fans configuration, will be much more punishing than liquid cooling.
Nh d15 with front fan removed works excellent for the case you chose, tho i would rather get a p400a and add my own case fans. Not because the p600s is a bad case or the fans are not good, but because p400a power supply shroud is perforated and does not render the inferior front fan useless and sw3 or nf a12x25 will be just as good if not better, but also PWM.
GPU. Buy a model with a big radiator, from a brand that do not void your warranty for cooler removal and has a 4 or 5 pin mini pwm connector. Buy an adapter to normal pwm fan connector, remove the plastic shroud and the fans from the GPU, and use your preferred 120mm fans zip tied on it.
You will get a drastic improvement in temps and/or noise and you won't trade off die temperatures for VRM like with accelero or morpheus.
This kind of build should allow you run your build under full load at bellow 35dba with acceptable temps.