Been playing around with the memory kit and trying to oc to at least 3600 but having issues and can't get it to post. I did tighten the default xmp profile settings down and my cinebench scores have gone way up. Going to play around with just 4 sticks and see if I can get it to oc but may end up putting this kit on the shelf and getting the G.Skill 3600 256gb kit when they finally release the 16-19-19-39 3600 256gb kits https://www.gskill.com/community/150...HEDT-Platforms
. I see plenty of the 18-22-22-42 but those timings stink
Was able to play around and think I am happy other than not oc'ing to 3600
The 17,829 run @4.2ghz oc was with my old 64gb CL19 3600 kit
The 17,820 run @3.7ghz stock was with the new ram kit and tying to get the timings very tight, however Cinebench had no problem but the pc crashed running Prime95
The 17,641 run @3.7ghz stock was after loosening the timings @3200 but tighter than the xmp profile settings.
Not sure why but it lost my non oc run with the 3600 kit but it was ~16,600. While Cinebench went up I noticed in games I did lose some performance as the GPU load is now lower than it was previously (not by a lot but enough to notice) and feel that the lower speed ram is just not keeping up fast enough with the demand of the card. Hopefully I can hit 3600 and do a better comparison and then go back to the CPU oc.