"Black Water" Storm Sniper Water Cooling Build -56kers Beware- - Overclock.net - An Overclocking Community

Forum Jump: 

"Black Water" Storm Sniper Water Cooling Build -56kers Beware-

Thread Tools
post #1 of 128 (permalink) Old 01-01-2011, 10:14 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106

I have been researching/lurking these forums for a while now. About a month ago I decided to water cool my set up. I had fairly good temps with my i7 950 and dual 6870s on air, but the noise from the fans to achieve these temps was too much. At 20c ambient I got an average of 60c from my i7 950 at 4ghz in IntelBurn. In Furmark I would reach 70c at 20c ambient from my 2 6870s. However, the noise was just too much, and I think I was just looking for an excuse to water cool. So...

On to the build-

PulkPull is offline  
Sponsored Links
post #2 of 128 (permalink) Old 01-01-2011, 10:15 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106
Current status - *Done*

***Please note*** As you look through the build, alot of stuff done early in the build was redone later in the build. As I learned what I was doing I made stuff better. So you may look at something and say eww... but that eww was fixed later on.

I AM DONE with my build. The countless hours I think really paid off and I am very satisfied with the results. I have built computers many times before, but they were all plug and play. I have never modded, drilled, cut, or watercooled a build before this and it was fun. So much fun, that I am contemplating selling this one and doing another one all over again with what I have learned from this build. I love it and it looks great, but I have learned ALOT from it, I think I could do more with my next build. I want to thank the many people that helped in my countless questions (this forum community is awesome).

Here is a quote by repo_man that sums up EXACTLY what I was going for in this build. I can't say it better myself, so I won't. I'll let repo_man do it-
Originally Posted by repo_man;12338179 
Indeed. As I look at it now, I love the subtlety of it. It's very understated. If one didn't know modding or what he/she was looking at, the case would look very plain and stock. It's very understated sexy. I like it. It's mean looking, plain (sleeper'ish if you will; if you're a car guy), clean, but bold too. A very well executed mod man. yessir.gif

Enough ranting.... on to the pics -

This pic is after I replaced the i7 950, sabertooth x58, xms3 ram, and the rasa block. I replaced all that with a 2600k, msi p67a gd55, corsair vengeance ram, and a EK supreme HF CU nickle block wheee.gif


These pics are before the above change but still represent the build well.


PulkPull is offline  
post #3 of 128 (permalink) Old 01-01-2011, 10:16 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106
Here is what I started with -

IMG_1082 by ColeKristy, on Flickr

Here is what I decided to do -


The list of items I bought to water cool-

XSPC RX360 radiator
XSPC RS240 radiator
XSPC X2O 750 Dual pump/reservoir (I know this may be weak, but I will monitor and upgrade if need be)
XSPC Rasa CPU waterblock
2 EK Nickel+Acetal Full 6870 waterblocks
EK Parallel SLI/CF bridge + the 2 req links
Swifttech Radbox
5 Gentle Typhoon 1450 rpm fans
3 Xinruilian RDL1225S fans
2 KillCoils
6ft PrimoChill PrimoFlex 1/2"ID hose
1 Gallon Distelled Water
Misc. Barbs and Clamps

IMG_1081 by ColeKristy, on Flickr

IMG_1080 by ColeKristy, on Flickr

So, let's get started.

My 1st task was to remove the 6870s and add the EK blocks and bridge. The EK products I used were EXTREMLY well build with clear instructions. The fun part was putting the TIM on the spacers that go between the blocks and the card so that they did not fall off when you turned the water block over to mount it. It worked well but I was afraid the spacers were going to shift or fall off the whole time I was doing it. It worked out well. The most time consuming part was cutting the thermal pads to fit, but all in all everything went smooth.

One done -

IMG_1085 by ColeKristy, on Flickr

Two Done -

IMG_1090 by ColeKristy, on Flickr

After that was done I started installing the bridge. It went on super easy.

All done -

IMG_1093 by ColeKristy, on Flickr

IMG_1091 by ColeKristy, on Flickr

I got a bit excited for a sec and forgot the motherboard was about to come out. But, it made for a nice pic. These 6870s are really solid, with NO flimsiness with that bridge installed. Highly recommended.

IMG_1094 by ColeKristy, on Flickr

I then removed the 6870s and took my NH-D14 off to prepare the motherboard for the XSPC rasa CPU block. The i7 950 is lapped, and it is done better than the below pic does it justice. I just could not get the lighting right to really reflect the fan-

IMG_1095 by ColeKristy, on Flickr

The Rasa went on semi-smooth. One of the attachment posts had a stuck lower knurled nut, but a little "gentle" persuasion goes a long way. I didn't notice the nut was stuck until after I screwed the post down, so I had to take the post back off and use two pliers to free the nut. I guess they got some paint in the threads? Either way, it got free and easy after the pliers loosened it.

All Done -

IMG_1111 by ColeKristy, on Flickr

Next up was a bit of wire chaos. I freed every previous attempt of wire management I had before and took the top of my case to prepare the upper internal 240 radiator.
Some "controlled" chaos -

IMG_1096 by ColeKristy, on Flickr

Once I had the top of the case off I noticed a little problem that was easily solved. The metal riveted on rear handle covered up too much of my fan than I liked -

IMG_1101 by ColeKristy, on Flickr

So, I drilled the rivets off and all was good -

IMG_1102 by ColeKristy, on Flickr

The upper rad was an easy install. I am still waiting on my Gentle Typhoons, once I get them they will be installed in the push position -

IMG_1105 by ColeKristy, on Flickr

After the upper rad I installed the radbox's mount mechanism. It was an easy install. The pump/res went in easy too -

IMG_1106 by ColeKristy, on Flickr

IMG_1103 by ColeKristy, on Flickr

I went to install the case top but realized it would no longer fit with the two rad fans on top. So I had to do some cutting. I wish I had took some before pics but I forget. Here is how it turned out -

IMG_1112 by ColeKristy, on Flickr

Next, I installed the motherboard and the external 360 radiator. The radiator went on easily. However, I don't know if the plastic rad box is meant to hold the rx360 as it is a bit flimsy, but it works. The I have 1 Gentle Typhoon installed in push now, when I get the rest the will be in push too.

IMG_1116 by ColeKristy, on Flickr

Time for tubing. The primoflex does a good job of not kinking. I have to pull my res out a bit to fill it up so the hoses going to it have to be a bit longer to accommodate. The hose going from the pump to 1st rad almost wants to kink when I push the reservoir back in, but I think it will be ok -

IMG_1120 by ColeKristy, on Flickr

After that it was time to leak test. It's been running now for 8 hours with no leaks. After lunch I will start wire management. I will not be able to get it all done as I am still waiting for sleeving and 4 more fans, but I will be able to get to the point of firing her up and testing some temps.

That's all for now, I am hungry.

PulkPull is offline  
Sponsored Links
post #4 of 128 (permalink) Old 01-01-2011, 10:39 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106
-Wire Management-

*Please note, this is still a work in progress. I plan to completely sleeve my PSU with black sleeves. This will have to wait until I get back from vacation around the 20th of Jan.*

Starting off-

IMG_1121 by ColeKristy, on Flickr

First thing I wanted to do was temporarily get rid of the exposed wires seen here -

IMG_1122 by ColeKristy, on Flickr

I say temporarily because I hope to fully sleeve this once I get back from vacation.

I had to rig a tool up to get my PSU out since I could no longer fit a screw driver on the bolt heads do to the radiator placement -

IMG_1125 by ColeKristy, on Flickr

Here is my temp repair. I got some ghetto cable management supplies from Lowes and did this -

IMG_1123 by ColeKristy, on Flickr
IMG_1126 by ColeKristy, on Flickr

Half way done -

IMG_1128 by ColeKristy, on Flickr

All done for now - **I will sleeve all exposed wires seen in pic below when I get back from vacation**


PulkPull is offline  
post #5 of 128 (permalink) Old 01-01-2011, 10:40 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106
Here are the temp results of the watercooling-

My 6870s overclocked to 1000/1100 ambient of ~20c

My i7 950 overclocked to 4.0ghz ht off ~1.26v

PulkPull is offline  
post #6 of 128 (permalink) Old 01-01-2011, 10:41 AM - Thread Starter
New to Overclock.net
Join Date: Dec 2010
Location: Dover AFB
Posts: 699
Rep: 106
Still to do-
updated - Feb 1 2011

1) A bit better wire management

2) Clear window side panel

3) Better, more complete pics

PulkPull is offline  
post #7 of 128 (permalink) Old 01-01-2011, 10:43 AM
Retired Staff
kcuestag's Avatar
Join Date: Jan 2010
Location: Madrid, Spain
Posts: 16,548
Rep: 334
Looking great so far! Congratz mate! devil-smiley-019.gif

The "NoMoreUpgradesUntilXmasPC" Build Log

GPU's: HD5850 > HD5970 > 2x HD6970 > 2x GTX580 > 3x GTX580 >
> 2x GTX680 > 2x HD7970 > R9 290X > 2x R9 290 > GTX970 > 2x R9 290X >
> GTX980Ti > 2x GTX980Ti > 2x GTX1080 > 2x GTX 1080 Ti

kcuestag is offline  
post #8 of 128 (permalink) Old 01-01-2011, 12:28 PM
New to Overclock.net
FannBlade's Avatar
Join Date: May 2010
Location: Indianapolis, IN
Posts: 2,959
Rep: 226
Nice! Got to love those EK blocks and bridge they really hold the cards straight.

FannBlade is offline  
post #9 of 128 (permalink) Old 01-01-2011, 05:00 PM
New to Overclock.net
SilveR_172's Avatar
Join Date: Nov 2009
Location: UK - Leeds
Posts: 277
Rep: 14
Nice work ! Love the EK Blocks for the GPU's


SilveR_172 is offline  
post #10 of 128 (permalink) Old 01-01-2011, 07:56 PM
New to Overclock.net
CD69Scorp's Avatar
Join Date: May 2009
Location: Phoenix Az
Posts: 301
Rep: 53
Glad to see another Sniper water cooled:) Very nice job +rep.
Those EK blocks look great, you should be getting a little better temps on your cpu at idle with all that rad, but your loud temps look about right.
Wire management on the Sniper is pretty good, remember there is a lot of space between bottom of the case and the bezel same up top.
Again great job!!
CD69Scorp is offline  

Quick Reply

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off