Announcing Megumin, an S8S build!
In case it was not obvious from all the gifs, this build is themed after Megumin from Kono Subarashii Sekai ni Shukufuku o! (Konosuba: God`s Blessing on This Wonderful World!) So the colors will be black, red and brass.Now to reveal the build specs...
Case: Case Labs S8S Black with 280 & 360 mount Left side and Top windows
CPU: AMD 1700 @ 4.0GHz (binned)
Motherboard: ASRock Fatal1ty X370 Pro
RAM: 32GB Ripjaws F4-3200C14D-32GVR
GPU: GTX 1070 SEA HAWK EK X (already own)
PSU: Seasonic SSR-850TD
M.2 SSD: 1TB 960 EVO
SATA SSD: 1TB Reactor, 500GB mx200 256GB m4, 256GB m4 (already own all of these)Oh did I mention, there is super exciting water cooling!
Rads: EK-RAD-PE-360 & EK-RAD-CE-280
Pump: Aquastream Ultimate AQ-41108
Res: Aquainlet PRO 100 ml AQ-34062
Compression Fittings: Brass For ID 1/2" OD 3/4" Tube BP-TBCPF-CC5U
120mm fans: CO-9050042-WW
140mm fans: CO-9050047-WW
CPU Block: EK-SUPREMACY-EVO-AMD-NP
Controller: Aquaero 6 LT AQ-53234 with AQ-53158 red heatsink
There is also all the other fittings like QDs and 90s and 45s ect.When completed, it will explode
..please don'tLet's see some pics
This is the Aquastream Ultimate before bing mounted into the case. I covered the mounting area with masking tape and marked the drill points. I also put masking tape double sided around the area and below to catch the metal that was going to fly everywhere. I then used more tape to clean up any access.
Here you can see the pump mounted to the case. You can also see the AQ 6 mounted next to it. I took an old plastic bay cover and drilled holes in it for mounting and then painted it black to match. I Then simply velcroed it to the case.
Here you can see the AQ6 from above, some of the fan cables are already connected.
Here is a pic of the first pressure test of the entire case cooling system, about 40% of the system is complete. There will be 3 more tubing runs to do from the pump to the gpu, the gpu to the cpu and the cpu to the 280 rad.