Overclock.net - An Overclocking Community - View Single Post - Marksman pot pictures. Retail Now!

View Single Post
post #128 of (permalink) Old 09-22-2012, 02:10 AM - Thread Starter
el gappo
Retired Staff
el gappo's Avatar
Join Date: Feb 2009
Location: England
Posts: 12,928
Rep: 389 (Unique: 261)
Topdog found some nice thick neoprene that fits but I like to use frostking and some armaflex tape which works nicely thumb.gif

Insulation pics (Click to show)

Neoprene tube
Originally Posted by CL3P20 View Post

thought i would post a couple pics of getting the pot insulated up...

*I use my own method.. tried/true.

I start with a layer of shop towel.. which is wrapped/masking taped tightly to the pot

..then start adding your choice of insulating wrap.. and/or sleeve. Due to the size of the Marksman, I choose some Frost king wrap..


...2x overlapped layers.. with seams 180 from each other..nicely trimmed..


..ready for mount and outer-sleeve [to catch moisture run-off/build-up] ...

*Pre-testing today, on EP45-UD3R with E8500 @ 5.7+


More in-bound today..

*pics taken using HTC Vivid

Frostking + armaflex tape.

http://www.ebay.ca/itm/Foam-Tape-Insulation-Tape-FOR-HOT-OR-COLD-PIPES-1-8-x-2-x-30-Feet-Roll?item=170862562951&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D2221479006347231800 30ft should last a while eh redface.gif

Twitter @el_gappo @Overclocknet

Redhat: "The datasheet is clear so its pretty hard to read without an overhead projector"
el gappo is offline